Latest activity

Welcome to the forum. A likely culprit to running rough is the ignition system. I see in the pic that you posted the tractor is...

I've used Indian Head gasket sealer extensively on my '48 Cub as part of a thorough restoration 25 years ago. Still no leaks at all.

Welcome to the forum. After a required # of posts and time on the forum, you can view all the manuals, etc. available here. It looks...

Hi, all. I'm taking the leap into refurbishing our 1948 Farmall Cub that has been in the extended family since it was new. It actually...

Here’s one installed on the other end of mine. Been in use for years, also

Earlier this summer I came home to find that a 9 inch diameter locust tree had fallen from the county park and smashed my chain link...

Agree!

Bearing cup and cone should always be replaced as a set.

Well, guys, that did the trick. Had to use a piece of shrink wire loom to squirt the oil into the hole...I put about a 1/2 pint...

Well, guys, that did the trick. Had to use a piece of shrink wire loom to squirt the oil into the hole...I put about a 1/2 pint...

There is a "service" called the Cub Express...it often is used to get assistance from forum members in moving tractors or parts around...

There is a "service" called the Cub Express...it often is used to get assistance from forum members in moving tractors or parts around...

Hi just wanted to say thanks for the opportunity to join. I get to learn and ask questions about my Cubs. I live in North Idaho and own...

I understand a small shop. Good to have you on board.

Thank you all for letting me join the community. I went out and purchased this 1950 Farmall cub. It was stuck, and I was able to free up...