What happened at work today.

Got Cole’s thumb back from paint. He’ll be happy when I get home.
 

Attachments

  • B0D0A96E-A806-43B7-8964-EA53C9674265.jpeg
    B0D0A96E-A806-43B7-8964-EA53C9674265.jpeg
    117.5 KB · Views: 640
  • 47366C2F-4507-4DEE-99E2-765267EFD06A.jpeg
    47366C2F-4507-4DEE-99E2-765267EFD06A.jpeg
    145.3 KB · Views: 640
  • 6D5BC3DF-0441-4BD6-85EE-52528D758D37.jpeg
    6D5BC3DF-0441-4BD6-85EE-52528D758D37.jpeg
    162.1 KB · Views: 640
  • 1A83AC91-AB70-4DC9-8DCD-0258B6B634F0.jpeg
    1A83AC91-AB70-4DC9-8DCD-0258B6B634F0.jpeg
    137.8 KB · Views: 640
  • EE914A58-902A-4F4B-AFEC-0D173C73DC4C.jpeg
    EE914A58-902A-4F4B-AFEC-0D173C73DC4C.jpeg
    107.4 KB · Views: 640
He loves it. He had to get his vest a customer gave him so he could do some construction work he said.
 

Attachments

  • 1EEFC4B4-E267-4EE4-BE96-C8FF73035565.jpeg
    1EEFC4B4-E267-4EE4-BE96-C8FF73035565.jpeg
    143.9 KB · Views: 607
Flipped the calendar here at work to December and remembered this week is 7 years of soberness for me. What a blessing!!!
 
Awesome work as usual! Has he seen any of these videos on youtube?

[youtube]A8ZoedAjt-0[/youtube]

Shane Nelson":2823o1q5 said:
Got Cole’s thumb back from paint. He’ll be happy when I get home.
 
Shane Nelson":11otfz1j said:
Flipped the calendar here at work to December and remembered this week is 7 years of soberness for me. What a blessing!!!

That is a blessing! I know you couldn't have done it alone...

Stay the course!!
 
Stanton":84bypfgd said:
Shane Nelson":84bypfgd said:
Flipped the calendar here at work to December and remembered this week is 7 years of soberness for me. What a blessing!!!

That is a blessing! I know you couldn't have done it alone...

Stay the course!!
:Dito: :Dito:
 
Back to work on the Lely from page 21. The ejector disc is in good shape but the vanes are not. I found some new vanes but multiplied x 6 plus shipping I’d have more in them than I gave for the spreader. Got some pipe, angle for a straight evenly spaced edge and a cut off wheel on a grinder and made 6 new ones. Put a small curve in them with the press.
 

Attachments

  • EC3CE163-718C-43F9-A89B-AD4E34A7B8A2.jpeg
    EC3CE163-718C-43F9-A89B-AD4E34A7B8A2.jpeg
    150.4 KB · Views: 498
  • 885C2F61-D814-4408-8448-F6B691AFC30A.jpeg
    885C2F61-D814-4408-8448-F6B691AFC30A.jpeg
    107.4 KB · Views: 498
  • FD8D6BA8-FBCC-47A7-844F-2A86C2D4B1D0.jpeg
    FD8D6BA8-FBCC-47A7-844F-2A86C2D4B1D0.jpeg
    180 KB · Views: 498
  • C7E3B9A0-C9EB-4C71-BBC2-48AB14F62F39.jpeg
    C7E3B9A0-C9EB-4C71-BBC2-48AB14F62F39.jpeg
    134.5 KB · Views: 498
  • F68E15A1-4ED8-46A0-8A5E-CA956276C716.jpeg
    F68E15A1-4ED8-46A0-8A5E-CA956276C716.jpeg
    125.2 KB · Views: 498
Welded a stud to the table to rotate it around evenly and welded a couple other pieces to the table to get them spaced right. I also weighed these 6 vanes on a digital scale and got them all to within .1 ounce of each other. Now if I can just keep my welds the same the balance will be close.

*See last page at bottom for the beginning of this Lely ejector disc start. See page 21 for the Lely itself.
 

Attachments

  • 2F7AC715-CA21-4AD4-8F73-9CE1D45D1485.jpeg
    2F7AC715-CA21-4AD4-8F73-9CE1D45D1485.jpeg
    176.6 KB · Views: 959
  • D9D295F7-C15A-4495-9AE4-01338082F260.jpeg
    D9D295F7-C15A-4495-9AE4-01338082F260.jpeg
    181.6 KB · Views: 959
  • 17C5ACE6-8E5B-463D-9636-7A1171054914.jpeg
    17C5ACE6-8E5B-463D-9636-7A1171054914.jpeg
    179.9 KB · Views: 959
Urbish":2bxdahso said:
Awesome work as usual! Has he seen any of these videos on youtube?

[youtube]A8ZoedAjt-0[/youtube]

Shane Nelson":2bxdahso said:
Got Cole’s thumb back from paint. He’ll be happy when I get home.
He hasn't, I haven't either I don't think. I'll have to show him, he'll be wanting me to make some of that too :lol:
 
Took this Lely to get burned, sand blasted, powdercoat primed & powdercoat painted red today. We’ll see how long it takes. I told him I didn’t need it until June.
 

Attachments

  • D110FAC3-E1CE-456F-B40C-F82DB69E858D.jpeg
    D110FAC3-E1CE-456F-B40C-F82DB69E858D.jpeg
    195.4 KB · Views: 893
Painter sent me this today. It’s burnt ready for blasting.
 

Attachments

  • 62FB4E1D-1760-4561-9EC0-E7F9CA99F90F.jpeg
    62FB4E1D-1760-4561-9EC0-E7F9CA99F90F.jpeg
    93.7 KB · Views: 847
Been tinkering with a couple IH fertilizer hopper bases while waiting on the Lely to be painted. Needed to make a new hook for one. First attempt it was to short as seen on the left of the three.
 

Attachments

  • C72CA72C-E742-4F28-9D30-B6532365974C.jpeg
    C72CA72C-E742-4F28-9D30-B6532365974C.jpeg
    170.7 KB · Views: 800
  • A3EE0AB9-F00F-45A9-8733-D30CD358450F.jpeg
    A3EE0AB9-F00F-45A9-8733-D30CD358450F.jpeg
    170 KB · Views: 800
  • C4821DD5-9BC3-4EE8-B333-AA9CE66FAEC0.jpeg
    C4821DD5-9BC3-4EE8-B333-AA9CE66FAEC0.jpeg
    106 KB · Views: 800
  • CF65FF09-802F-4AE6-B8B0-C46C4C9F594F.jpeg
    CF65FF09-802F-4AE6-B8B0-C46C4C9F594F.jpeg
    112.2 KB · Views: 800
  • 3649D53C-9E67-456A-BE29-7110F6E22850.jpeg
    3649D53C-9E67-456A-BE29-7110F6E22850.jpeg
    103 KB · Views: 800
2nd attempt I used a piece of 1/4” key stock as a spacer at the head and the pivot of the hand bender. It came out good. Should be good for a while, made it out of stainless. Original is on the left.
 

Attachments

  • 07FD14F5-38F1-4DCB-916A-97F3E1F7CC8B.jpeg
    07FD14F5-38F1-4DCB-916A-97F3E1F7CC8B.jpeg
    97 KB · Views: 799
  • C4A81E27-8C0D-40A1-8F87-5161C73147BF.jpeg
    C4A81E27-8C0D-40A1-8F87-5161C73147BF.jpeg
    151.3 KB · Views: 799
  • A7FC6BDF-4730-41A2-A1D2-98A060990023.jpeg
    A7FC6BDF-4730-41A2-A1D2-98A060990023.jpeg
    90.5 KB · Views: 799
Back
Top