What happened at work today.

Jim Becker":2v1kdo8o said:
Not sure exactly where you are going with this. But you want to let the frame flex to follow the ground.
I’m gonna weld some tabs on the hitch frame and then join them with short straps so it will flex, then chains from the top to the back.
 
Ready to attach the hitch to the drag.
 

Attachments

  • A2877F4E-FBCA-4395-8234-B71B42DBDFDB.jpeg
    A2877F4E-FBCA-4395-8234-B71B42DBDFDB.jpeg
    134.7 KB · Views: 778
  • 5A6F7089-AC1C-43A6-8EDD-A3A426AEB2D6.jpeg
    5A6F7089-AC1C-43A6-8EDD-A3A426AEB2D6.jpeg
    139.7 KB · Views: 778
Bill Hudson":247un7y1 said:
Based on some experience using the mounted harrow on a Cub, I would suggest an attachment that allows lateral movement as well.

Bill
Thanks for the suggestion Bill. Truth be told, this will probably be used behind the Ford more than the Cub or the 140. I have this hitch I made that I'll hook it to and the 3 point will let it swing side to side. I'm only gonna use it for the deer plot probably 30 minutes a year and I can't see hauling the Cub or 140 over to where the Ford will already be. It will be nice to move it around the yard if need be with the Cub or 140 though.
 

Attachments

  • IMG_2093.jpg
    IMG_2093.jpg
    106.6 KB · Views: 771
Got to start somewhere. I’ll have to adjust the chains when I hook it up. Only reason I put 2 on each side is so it will be a little more level when loading and unloading off the trailer.
 

Attachments

  • 93E5F23F-69DB-4EB2-A513-D0C5527F326E.jpeg
    93E5F23F-69DB-4EB2-A513-D0C5527F326E.jpeg
    159.6 KB · Views: 753
  • B43E292C-D398-4D88-BB09-3E3B8788890F.jpeg
    B43E292C-D398-4D88-BB09-3E3B8788890F.jpeg
    141 KB · Views: 753
Bill Hudson":1f2z7bll said:
Based on some experience using the mounted harrow on a Cub, I would suggest an attachment that allows lateral movement as well.

Bill
The one-point on the tractor can be set to allow a limited range of sideways movement. That should be adequate.
 
I’ve already restored 2 spreaders this year, one Lely I planned on keeping and a sitrex 250. The Lely was a 1,250 pound capacity and just to big for my needs. I wanted it cause my dad has one. Realized just because he has one don’t mean I need one that big too.

A friend about 35 minutes away saves me feed sacs so I can put corn in them and I went and got them about a month ago and saw this Lely in a shed at a farm he rents. I inquired about it and he said he would find out. He called me Saturday and said the lady said it was for sale, she didn’t need it. I made an offer and it changed addresses. He told me it worked good last time the man used it but he’s been dead for 21 years and he knows it hasn’t moved. It’s actually not in that bad of shape.

I put the other Lely I restored for sale and sold it in less than 2 hours.

This one will be staying. I think it’s a 450 pound capacity.
 

Attachments

  • 187937EC-6206-4E68-8A85-BEFC8E3940C9.jpeg
    187937EC-6206-4E68-8A85-BEFC8E3940C9.jpeg
    126 KB · Views: 705
  • 50D39E03-1C88-43FE-9715-11FB11166F04.jpeg
    50D39E03-1C88-43FE-9715-11FB11166F04.jpeg
    110 KB · Views: 705
  • F81A0A25-F4BE-4218-8C9F-F272A8A73400.jpeg
    F81A0A25-F4BE-4218-8C9F-F272A8A73400.jpeg
    102.6 KB · Views: 705
  • B6EC4958-4A24-4A06-B9CC-534512902F61.jpeg
    B6EC4958-4A24-4A06-B9CC-534512902F61.jpeg
    154.3 KB · Views: 705
  • 2D830435-81C5-4658-8F8D-3A87B53E7151.jpeg
    2D830435-81C5-4658-8F8D-3A87B53E7151.jpeg
    114.1 KB · Views: 705
Dang it Shane! Didn't even give us a chance to own it!? :lol: That's ok, cause you're too far away for a drive right now with the holidays coming up. Now if you were closer, I'd be sad I missed it! Can't wait to see the restoration of the new one!
 
I love it when people take care of stuff like they should. This spreader has been sitting for 21+ years and I got it to this point without lighting the hot wrench.
 

Attachments

  • 8E6298EE-4CB2-440A-9AFB-C10C4680A63B.jpeg
    8E6298EE-4CB2-440A-9AFB-C10C4680A63B.jpeg
    186.6 KB · Views: 660
  • 1E57687D-C438-417D-AC15-662F3BEC22E4.jpeg
    1E57687D-C438-417D-AC15-662F3BEC22E4.jpeg
    171.5 KB · Views: 660
  • C27341D9-C779-4167-8BE0-EDEA775537BF.jpeg
    C27341D9-C779-4167-8BE0-EDEA775537BF.jpeg
    161.7 KB · Views: 660
  • 7EDE74C6-36AA-40C0-811A-C956AE7E471B.jpeg
    7EDE74C6-36AA-40C0-811A-C956AE7E471B.jpeg
    152.3 KB · Views: 660
  • 54017204-30E9-4085-97FF-AEBC0391C46D.jpeg
    54017204-30E9-4085-97FF-AEBC0391C46D.jpeg
    180.7 KB · Views: 660
Brought the drag home and my buddy helped put together what we could, I forgot to bring the chains home. We’ll try it out another day.
 

Attachments

  • A449F164-EF0F-435F-8766-AA961F3F49FE.jpeg
    A449F164-EF0F-435F-8766-AA961F3F49FE.jpeg
    290.8 KB · Views: 616
Lifts good.
 

Attachments

  • 08096319-DB2F-469B-925F-3E944054E8A2.jpeg
    08096319-DB2F-469B-925F-3E944054E8A2.jpeg
    262.7 KB · Views: 571
  • 6D421C4F-976C-45BE-AE64-110B67122005.jpeg
    6D421C4F-976C-45BE-AE64-110B67122005.jpeg
    229.2 KB · Views: 572
  • C7653F2A-0E93-4E9D-BB67-8C550254AA63.jpeg
    C7653F2A-0E93-4E9D-BB67-8C550254AA63.jpeg
    260 KB · Views: 572
  • 7D5F1FF9-686B-4C65-8B67-32B9D5C88054.jpeg
    7D5F1FF9-686B-4C65-8B67-32B9D5C88054.jpeg
    294.9 KB · Views: 572
Finished bush hogging the farm today. This one field I didn’t spray and the briars were 6’ tall. It was cold here today too but the good thing is no bees or snakes.
 

Attachments

  • 9CA0784C-FFB3-43F4-88C0-1BB58FA5F50D.jpeg
    9CA0784C-FFB3-43F4-88C0-1BB58FA5F50D.jpeg
    173.8 KB · Views: 538
  • 55A66B0A-8337-4CBF-A5BB-38F18BBDF72D.jpeg
    55A66B0A-8337-4CBF-A5BB-38F18BBDF72D.jpeg
    175.7 KB · Views: 538
Modified a MF share to fit a Cub 194 plow.

Bought this plow from a friend a couple weeks ago and the share, point and heel were wore slap out. I didn’t want to spend more money than it’s worth so I welded the holes in a MF share and cut it down and redrilled and countersunk the holes. It wasn’t the easiet thing to do but saved some money. Had a point and heel from other plows that are usable.
 

Attachments

  • F0638D51-CEBE-47ED-A2CB-6ECF7811B946.jpeg
    F0638D51-CEBE-47ED-A2CB-6ECF7811B946.jpeg
    191.6 KB · Views: 769
  • E033461C-59A9-432B-9C62-D283728FB7EB.jpeg
    E033461C-59A9-432B-9C62-D283728FB7EB.jpeg
    163.8 KB · Views: 769
  • 6CE98F26-2A8D-4C38-ABB4-FE1287E9A793.jpeg
    6CE98F26-2A8D-4C38-ABB4-FE1287E9A793.jpeg
    151.8 KB · Views: 769
  • 3637A811-B95C-416A-BBBD-16C0E0D3A47C.jpeg
    3637A811-B95C-416A-BBBD-16C0E0D3A47C.jpeg
    149.5 KB · Views: 769
  • 6B889F92-2DE6-4C7A-A2D5-1265A9962168.jpeg
    6B889F92-2DE6-4C7A-A2D5-1265A9962168.jpeg
    147 KB · Views: 769
Our son has been asking for an excavator with a thumb on it for 3 years. We can’t find one other than a small precision scale one that would be broken in no time. My wife said “just take one of his to work and make a thumb”. Okay, I brought one of his excavators in a couple weeks ago. He noticed it missing and I told him I was going to make a thumb when I had time. He’s been asking everyday. Finally got around to it.

Got the mounting bracket welded together and had to put it on a diet. It was too heavy and weighed the boom arm down.
 

Attachments

  • DE6C4BE3-D8F2-48C1-A12D-F00C71BC6FC5.jpeg
    DE6C4BE3-D8F2-48C1-A12D-F00C71BC6FC5.jpeg
    169.7 KB · Views: 687
  • 388E4CF0-E61F-4E7A-9890-1E62CE79A376.jpeg
    388E4CF0-E61F-4E7A-9890-1E62CE79A376.jpeg
    179.9 KB · Views: 687
  • DD44DF3E-D54B-4806-B62B-889F1E773F23.jpeg
    DD44DF3E-D54B-4806-B62B-889F1E773F23.jpeg
    116.2 KB · Views: 687
  • F7259D46-8049-47F4-ADDB-F593B2FAA3B9.jpeg
    F7259D46-8049-47F4-ADDB-F593B2FAA3B9.jpeg
    147.5 KB · Views: 687
  • 9B4303A8-4398-4C5C-A560-49B67A068075.jpeg
    9B4303A8-4398-4C5C-A560-49B67A068075.jpeg
    209.1 KB · Views: 687
  • E4B0E060-247A-40AE-ACDB-DFF4A1832E87.jpeg
    E4B0E060-247A-40AE-ACDB-DFF4A1832E87.jpeg
    156 KB · Views: 687
After making the bracket out of steel, decided aluminum would be best for the thumb arm. Got it done and took it to get powder coated.

Have drill bits in it for pins, ordered some pins from McMaster Carr.
 

Attachments

  • 0DE0876E-11AE-4801-9AED-11C298CAEF9B.jpeg
    0DE0876E-11AE-4801-9AED-11C298CAEF9B.jpeg
    116.3 KB · Views: 686
  • 9EC5BEA0-2E91-4327-ABD1-E02AE4FC1E67.jpeg
    9EC5BEA0-2E91-4327-ABD1-E02AE4FC1E67.jpeg
    111.3 KB · Views: 686
  • 626A4D3B-62DD-41DB-9BA7-0F9FEB465553.jpeg
    626A4D3B-62DD-41DB-9BA7-0F9FEB465553.jpeg
    160.1 KB · Views: 686
  • 27101B87-694F-4DA5-9DF9-D39FFA541DBC.jpeg
    27101B87-694F-4DA5-9DF9-D39FFA541DBC.jpeg
    125.5 KB · Views: 686
Back
Top