What happened at work today.

Sorry you went through that ordeal, Shane. But at least you didn't lose money on it.

I wonder if RVs are like boats? They say the best 2 days of boat ownership are the day you buy it and the day you sell it.... :wink:
 
Stanton":1k6uudwp said:
S... I wonder if RVs are like boats? They say the best 2 days of boat ownership are the day you buy it and the day you sell it.... :wink:

I've heard of boats being defined as "a hole in the water that you throw money in."

Bill
 
Made a pulley for 69ranger, now to ship it and see if it fits.
 

Attachments

  • E053A35D-9BCF-4B21-A62D-74C625AF9F7A.jpg
    E053A35D-9BCF-4B21-A62D-74C625AF9F7A.jpg
    152.3 KB · Views: 22,020
  • 2CD38748-C844-4382-AC92-90CCDA372F11.jpg
    2CD38748-C844-4382-AC92-90CCDA372F11.jpg
    127.7 KB · Views: 22,020
Hi Shane,
Fantastic! This looks great, and should work just fine. Thank you for the hard work.
The old lathe will be a handy tool to have in the shop, and I look forward to getting it up and going.
I will PM the address, to you later today. Be sure and let me know what I owe you for this work. :)
 
Pulley arrived Friday, and looks to be a spot on match for what I needed.
Thank you so much for the hard work! I look forward to getting this machine running again.
 
I bought this trailer about 20 years ago from a guy who made it in 1981, I've put some miles on it. Ripped everything off and started fresh. It didn't have lights when I bought it and they've been sketchy lately so off with them and new LED's it is. I put reverse lights on it for when we deer hunt and backing up at night.
 

Attachments

  • 14F53250-5DE3-4402-B47A-C9217FB5CBC8.jpg
    14F53250-5DE3-4402-B47A-C9217FB5CBC8.jpg
    316 KB · Views: 31,235
  • AB6A98DA-983F-4697-A75E-1BB450903501.jpg
    AB6A98DA-983F-4697-A75E-1BB450903501.jpg
    337.2 KB · Views: 31,235
  • 6D804224-D270-4647-BE8E-E05476A5928D.jpg
    6D804224-D270-4647-BE8E-E05476A5928D.jpg
    293.3 KB · Views: 31,235
  • C76B83FE-B09E-4CA6-AAFB-5F23D856CA6A.jpg
    C76B83FE-B09E-4CA6-AAFB-5F23D856CA6A.jpg
    504.5 KB · Views: 31,235
Time for paint, wiring, and light test.
 

Attachments

  • 960408F2-CFE2-464F-94D1-B0EE6C334434.jpg
    960408F2-CFE2-464F-94D1-B0EE6C334434.jpg
    499.8 KB · Views: 31,235
  • 2BA74883-0EBD-48E5-BDC9-0DD4498377F7.jpg
    2BA74883-0EBD-48E5-BDC9-0DD4498377F7.jpg
    505.3 KB · Views: 31,235
  • 75206AD3-7DED-4BB6-BC39-1F5D3830A2F7.jpg
    75206AD3-7DED-4BB6-BC39-1F5D3830A2F7.jpg
    457.5 KB · Views: 31,235
  • 668C6971-DDE4-48E4-84BB-1949B57EF8D5.jpg
    668C6971-DDE4-48E4-84BB-1949B57EF8D5.jpg
    489.7 KB · Views: 31,235
New floor went in Saturday. Now to flip the ramps over and paint them and it'll be done.
 

Attachments

  • B1B4C36D-0F5D-4E56-AFB0-5CC832D3981A.jpg
    B1B4C36D-0F5D-4E56-AFB0-5CC832D3981A.jpg
    456.4 KB · Views: 31,234
  • 58DC2FA7-AD4F-4279-8CF6-FEB5C186766D.jpg
    58DC2FA7-AD4F-4279-8CF6-FEB5C186766D.jpg
    473.4 KB · Views: 31,234
Here in Ohio, it wouldn’t be done until it had fenders mounted. It’s a law that is not strongly enforced, but a law non the less. Nice work as always, Shane!
 
Gary Dotson":1kpohlcj said:
Here in Ohio, it wouldn’t be done until it had fenders mounted. It’s a law that is not strongly enforced, but a law non the less. Nice work as always, Shane!
I thought about putting some on it but couldn't figure out what would look good with double axles and small tires so I left it like it was. He built it low so his father in law could get watermelons on it back in the day.
 
Put a new hitch on the trailer and the lock had a gap. Luckily I know a guy who can make the gap go away.
 

Attachments

  • 8D2B2862-0796-4A50-8A22-BE16DD3C517C.jpg
    8D2B2862-0796-4A50-8A22-BE16DD3C517C.jpg
    173.6 KB · Views: 31,169
  • 6773A31E-AF96-4E42-8A88-25BAD71B2B8F.jpg
    6773A31E-AF96-4E42-8A88-25BAD71B2B8F.jpg
    110.5 KB · Views: 31,169
  • CECD9C57-D6A5-4010-84B5-7B45FBD208C1.jpg
    CECD9C57-D6A5-4010-84B5-7B45FBD208C1.jpg
    301.9 KB · Views: 31,169
  • EB091D6B-0ECF-4CE3-AB71-E28D5053E8D7.jpg
    EB091D6B-0ECF-4CE3-AB71-E28D5053E8D7.jpg
    174.7 KB · Views: 31,169
Years ago, when I built a small tandem trailer, with smallish tires, I found some 2 piece fenders that I was able to adjust the overlap to make them look right.
 
Trailer is done!
 

Attachments

  • F617D101-1C62-4E50-8D3E-24247F571334.jpg
    F617D101-1C62-4E50-8D3E-24247F571334.jpg
    442.4 KB · Views: 31,016
  • 9B6ECE6E-7D9B-41A7-A065-6F9A8BF36050.jpg
    9B6ECE6E-7D9B-41A7-A065-6F9A8BF36050.jpg
    473.3 KB · Views: 31,016
My son broke the bucket on his trackhoe, metal one should hold up.
 

Attachments

  • FD3A5908-0007-4254-9F83-079D8BEB6694.jpg
    FD3A5908-0007-4254-9F83-079D8BEB6694.jpg
    209.6 KB · Views: 30,430
  • 9495130B-68CE-41ED-B9D1-45116BA0E20D.jpg
    9495130B-68CE-41ED-B9D1-45116BA0E20D.jpg
    222.3 KB · Views: 30,430
  • A9ADA0FB-BCF8-4A82-A593-3CD13BDB17E2.jpg
    A9ADA0FB-BCF8-4A82-A593-3CD13BDB17E2.jpg
    111.5 KB · Views: 30,430
  • 4B6C5EC3-618F-4B45-AABD-873A370DF945.jpg
    4B6C5EC3-618F-4B45-AABD-873A370DF945.jpg
    206 KB · Views: 30,430
  • 23218B3E-8A66-4ACA-960D-2B91CC4D2017.jpg
    23218B3E-8A66-4ACA-960D-2B91CC4D2017.jpg
    205.6 KB · Views: 30,430
  • CCB99082-EA9C-4DD4-9362-8AD744A136EF.jpg
    CCB99082-EA9C-4DD4-9362-8AD744A136EF.jpg
    236.2 KB · Views: 30,430
Back
Top