What happened at work today.

Don McCombs":34dhxt9j said:
What are you doing to that wheel?
Boring the center out on the end so it will clear an axle for a customer. I don't like messing with wheels but the boss man said do it.
 
The drag is gone along with a bunch of other scrap. Got 1/3 of my investment back on the drag purchase.
 

Attachments

  • BABB8E37-31A8-46D5-8E6F-E5772609875A.jpeg
    BABB8E37-31A8-46D5-8E6F-E5772609875A.jpeg
    118 KB · Views: 2,385
I forgot how much fun hanging and finishing Sheetrock is, alone. Since we only have one bathroom I have to put everything back in so we can use it every time I take it out.
 

Attachments

  • 5EFAFE47-D162-4C00-9CB5-82B12263B1F9.jpeg
    5EFAFE47-D162-4C00-9CB5-82B12263B1F9.jpeg
    112.9 KB · Views: 2,205
  • 501A37BC-3BD7-46F3-9924-5D0382D4B6CD.jpeg
    501A37BC-3BD7-46F3-9924-5D0382D4B6CD.jpeg
    93.4 KB · Views: 2,205
I like it all. Don't need convince me it is working with a shower head. If it is done, done right. Merry Christmas! :{_}:
 
Got leaves up most of the day, hooked the gooseneck up to use Saturday and remembered I needed to put a PTO seal in the 4630. Backed it up the ramps to not lose much hydraulic fluid. Worked great!
 

Attachments

  • DD3CD6E4-55D9-4CE2-8422-431A8C11B47E.jpeg
    DD3CD6E4-55D9-4CE2-8422-431A8C11B47E.jpeg
    142.7 KB · Views: 2,663
Stanton":2phxphpw said:
Shane N.":2phxphpw said:
...Backed it up the ramps to not lose much hydraulic fluid...

...and also the safest way to load/unload a tractor on and off a trailer. :coffee:
I don’t know if I agree with the safest way with a dovetail. If the boards are the least bit wet with dew or whatever the tractor spins and could slide off. I don’t like backing one up to load unless it’s absolutely necessary.

I tried to back this up after you posted this and it wouldn’t do it with nothing on the back and those are brand new Firestone’s with 100 gallons of fluid in each one and two sets of wheel weights on each side. The dovetail wasn’t wet either.
 
Shane N.":1lkfimry said:
I don’t know if I agree with the safest way with a dovetail. If the boards are the least bit wet with dew or whatever the tractor spins and could slide off. I don’t like backing one up to load unless it’s absolutely necessary.

I tried to back this up after you posted this and it wouldn’t do it with nothing on the back and those are brand new Firestone’s with 100 gallons of fluid in each one and two sets of wheel weights on each side. The dovetail wasn’t wet either.

Not sure now where I got the idea that backing a tractor up trailer ramps is safer than driving it up. Depending on trailer design, slickness and ramp height, I believe you're correct that in some cases, driving it up would be safer.
 
Stanton":2aija3a3 said:
Shane N.":2aija3a3 said:
I don’t know if I agree with the safest way with a dovetail. If the boards are the least bit wet with dew or whatever the tractor spins and could slide off. I don’t like backing one up to load unless it’s absolutely necessary.

I tried to back this up after you posted this and it wouldn’t do it with nothing on the back and those are brand new Firestone’s with 100 gallons of fluid in each one and two sets of wheel weights on each side. The dovetail wasn’t wet either.

Not sure now where I got the idea that backing a tractor up trailer ramps is safer than driving it up. Depending on trailer design, slickness and ramp height, I believe you're correct that in some cases, driving it up would be safer.
Pretty sure the wood on the dovetail is the worse for backing anything up. The last trailer I had I made a steel dovetail that would level out for more flat trailer space. I welded 1/2” square bars across it about 6” apart and it gave plenty of traction. The rest was diamond tread steel and was as slick as a peeled onion without the bars welded on it.
 
Shane N.":1dmadjyp said:
Pretty sure the wood on the dovetail is the worse for backing anything up. The last trailer I had I made a steel dovetail that would level out for more flat trailer space. I welded 1/2” square bars across it about 6” apart and it gave plenty of traction. The rest was diamond tread steel and was as slick as a peeled onion without the bars welded on it.

I've heard that diamond plate and wood, when wet, are very slick.
 
Shane, I did the same thing on my old trailer. It had a beaver tail, which had been added, after the fact. Slick, smooth steel with glossy paint, when it was wet, I couldn't even walk on it. I didn't have a ready supply of square stock but I did plenty, free, 6mm rod. I welded them on, spaced about 4in. apart. Wow! what a difference!
 
Just got done with a fixture for a customer to stretch a spring so they can look inside it. Hope it works for them, it was their design.
 

Attachments

  • E2915999-BF1E-4D18-A90A-91399C805BB4.jpeg
    E2915999-BF1E-4D18-A90A-91399C805BB4.jpeg
    173.6 KB · Views: 2,038
  • 1F42DEAE-F919-4336-A72E-3128C3A1B97A.jpeg
    1F42DEAE-F919-4336-A72E-3128C3A1B97A.jpeg
    161.9 KB · Views: 2,038
  • A739BCD4-25DA-46FA-B136-3B5FDA8B74AA.jpeg
    A739BCD4-25DA-46FA-B136-3B5FDA8B74AA.jpeg
    246.5 KB · Views: 2,038
  • 23BDE6ED-0C26-472B-8F1F-2F0DF99F12BD.jpeg
    23BDE6ED-0C26-472B-8F1F-2F0DF99F12BD.jpeg
    94.3 KB · Views: 2,038
When you miss a decimal point and put 1.00 instead of .100
 

Attachments

  • 84E4BFE5-66A8-4A58-A9BC-EF1189C50502.jpeg
    84E4BFE5-66A8-4A58-A9BC-EF1189C50502.jpeg
    196.1 KB · Views: 1,729
  • 90FDD026-D6F8-4FE0-A9A3-A16F3B418A2E.jpeg
    90FDD026-D6F8-4FE0-A9A3-A16F3B418A2E.jpeg
    195.6 KB · Views: 1,729
  • E9334A06-F3C3-4238-AB2D-5B9833F78E53.jpeg
    E9334A06-F3C3-4238-AB2D-5B9833F78E53.jpeg
    185.4 KB · Views: 1,729
  • 02770B52-A616-4E29-B56A-2F02D20F3B5D.jpeg
    02770B52-A616-4E29-B56A-2F02D20F3B5D.jpeg
    178.4 KB · Views: 1,729
I had one that expanded metal on the back of my trailer because it was a landscape trailer before. I welded 1x1" angle for tracks and I have good traction. I don't like backing onto the trailer...too many things to watch at the same time, but I always try to have it on a slight incline at the house and use jacks under the back end.
 
Kids playhouse was getting rickety so I plucked the top off with the Ford and moved it, sawed it in half and reattached the top. Good to go for a little while longer.
 

Attachments

  • A795FBB7-E41D-4766-A9C1-1B98480E9873.jpeg
    A795FBB7-E41D-4766-A9C1-1B98480E9873.jpeg
    273.3 KB · Views: 1,122
  • 733513F7-F85F-4FE5-AE36-7E060E9687CD.jpeg
    733513F7-F85F-4FE5-AE36-7E060E9687CD.jpeg
    223.1 KB · Views: 1,122
  • A093E713-24D3-4014-96CF-BE8DB1B654FC.jpeg
    A093E713-24D3-4014-96CF-BE8DB1B654FC.jpeg
    186.4 KB · Views: 1,122
Took Cole over a couple weeks ago to shoot the .22 pistol for the first time. Yesterday we went again for his second time, he’s doing good to be 7 years old.

[youtube]9Ty2iMuI1l8[/youtube]
 
Have no idea what it’s for but it looks like the drawing.
 

Attachments

  • 029851A5-6E12-43A6-B5C5-5F03BD4A92E5.jpeg
    029851A5-6E12-43A6-B5C5-5F03BD4A92E5.jpeg
    80.6 KB · Views: 1,052
  • CB37F383-8EE8-4C56-8E4E-5142F0598140.jpeg
    CB37F383-8EE8-4C56-8E4E-5142F0598140.jpeg
    96.5 KB · Views: 1,052
  • 2C1B4258-673A-4ED0-AA03-C0F85647055A.jpeg
    2C1B4258-673A-4ED0-AA03-C0F85647055A.jpeg
    98.4 KB · Views: 1,052
  • E2AB852B-58D2-4D95-884F-0D6BAC49E6FA.jpeg
    E2AB852B-58D2-4D95-884F-0D6BAC49E6FA.jpeg
    130.7 KB · Views: 1,052
  • 29C46117-D3DA-4722-8241-8E0827A5BFE4.jpeg
    29C46117-D3DA-4722-8241-8E0827A5BFE4.jpeg
    135.8 KB · Views: 1,052
Back
Top