What happened at work today.

Slicks on a dually???
Maybe he was waiting for the steel belts to be built in chains.
I’ll bet that’s a hoot to follow on concrete at night. Sparks eminating from the tires
 
Repaired this rod for the sickle mower. The threads looked good but the nut would slip over them. I rethreaded the rod to M10-1.5 and put a thread insert in the nut.
 

Attachments

  • 24D20431-0A42-4989-8225-0D329602784C.jpeg
    24D20431-0A42-4989-8225-0D329602784C.jpeg
    149.8 KB · Views: 2,468
  • 691E6A2F-EA24-4865-983E-8A737D102B41.jpeg
    691E6A2F-EA24-4865-983E-8A737D102B41.jpeg
    121.7 KB · Views: 2,468
  • A487FBB5-5A7A-4F92-9E1C-F63628F0FE19.jpeg
    A487FBB5-5A7A-4F92-9E1C-F63628F0FE19.jpeg
    91.5 KB · Views: 2,468
  • 1CBB993F-18EB-4B41-AB51-E7FFE62359EC.jpeg
    1CBB993F-18EB-4B41-AB51-E7FFE62359EC.jpeg
    171 KB · Views: 2,468
  • 13E0BE9C-2A05-4646-83B2-651188E9880D.jpeg
    13E0BE9C-2A05-4646-83B2-651188E9880D.jpeg
    160.7 KB · Views: 2,468
Customer brought a bucket pin in yesterday from his trackhoe, wanted one that was one piece :lol:
 

Attachments

  • 0002ED23-B566-4164-87F2-180B483BC25C.jpeg
    0002ED23-B566-4164-87F2-180B483BC25C.jpeg
    158.5 KB · Views: 2,458
  • B70195E4-77CD-4449-B43B-AE4FBB3DDE86.jpeg
    B70195E4-77CD-4449-B43B-AE4FBB3DDE86.jpeg
    132.9 KB · Views: 2,458
Bob McCarty":2vbl5od9 said:
Just curious, if the threads were okay why didn't you just use a 7/16" insert on the crank nut?
The rod threads were worn about .020" as well, I'm not sure what someone did to this thing.
 
Shane N.":w4k5u3u6 said:
Customer brought a bucket pin in yesterday from his trackhoe, wanted one that was one piece :lol:

Can't understand why anyone would want one bucket pin when "two is better than one". :lol:
 
Stanton":r8nkvsr0 said:
Shane N.":r8nkvsr0 said:
Customer brought a bucket pin in yesterday from his trackhoe, wanted one that was one piece :lol:

Can't understand why anyone would want one bucket pin when "two is better than one". :lol:
:lol: Two may be better than one, this is the second one he's broken, not sure who made the second one but the original was a CAT. It's 2 3/4" O.D. X 29" long, must be a big bucket!
 
I got to stay away from friends houses :lol:
 

Attachments

  • 21218C91-7EC7-4F20-A39C-CC0889D981D2.jpeg
    21218C91-7EC7-4F20-A39C-CC0889D981D2.jpeg
    167.4 KB · Views: 2,201
  • CF6FEC48-A73D-41A6-860F-9CB424B1820C.jpeg
    CF6FEC48-A73D-41A6-860F-9CB424B1820C.jpeg
    280.7 KB · Views: 2,201
  • 3729CB82-CD41-443B-8838-01AC143DEE76.jpeg
    3729CB82-CD41-443B-8838-01AC143DEE76.jpeg
    237.1 KB · Views: 2,201
  • D0828DE0-5197-4AC8-9EAE-F1FE322DF15C.jpeg
    D0828DE0-5197-4AC8-9EAE-F1FE322DF15C.jpeg
    284 KB · Views: 2,201
  • 861F9CE6-E8F9-4CA5-A89B-C7817462CF42.jpeg
    861F9CE6-E8F9-4CA5-A89B-C7817462CF42.jpeg
    153.4 KB · Views: 2,201
  • FDC07BCA-CF0C-4171-B150-97A3265A077D.jpeg
    FDC07BCA-CF0C-4171-B150-97A3265A077D.jpeg
    264.4 KB · Views: 2,201
These plows will probably get some hot patches welded on them. They’re 12” super chief bottoms and it’ll cost more for parts than they are worth.
 

Attachments

  • 477F5F81-1235-4E18-AA5C-A1014BEECE62.jpeg
    477F5F81-1235-4E18-AA5C-A1014BEECE62.jpeg
    292.7 KB · Views: 2,636
  • A81E64A2-CF4B-4AFA-8A6C-3A892CFD37BC.jpeg
    A81E64A2-CF4B-4AFA-8A6C-3A892CFD37BC.jpeg
    182.1 KB · Views: 2,636
  • 89C12426-5D99-46AD-9641-84AD15F804EF.jpeg
    89C12426-5D99-46AD-9641-84AD15F804EF.jpeg
    275.9 KB · Views: 2,636
  • D05D2C6B-A85E-4C25-9A3A-DAA71DFFE86C.jpeg
    D05D2C6B-A85E-4C25-9A3A-DAA71DFFE86C.jpeg
    169.3 KB · Views: 2,636
The horse drawn row lister will be getting the FH prong cut off and set in the flower bed.
 

Attachments

  • 39D1A03D-99CE-4F0B-A089-2E8948E20EAD.jpeg
    39D1A03D-99CE-4F0B-A089-2E8948E20EAD.jpeg
    237.1 KB · Views: 2,636
  • D49195CA-D3C8-4997-BEF5-6CCC0ABAA6D3.jpeg
    D49195CA-D3C8-4997-BEF5-6CCC0ABAA6D3.jpeg
    260 KB · Views: 2,636
  • 12E33B04-ACD3-4661-94BD-1487E0306F71.jpeg
    12E33B04-ACD3-4661-94BD-1487E0306F71.jpeg
    284 KB · Views: 2,636
This thing will be getting the FH prong cut off and going to the scrapper.
 

Attachments

  • C223C639-F8B3-4554-BA21-D81A6E58B0F2.jpeg
    C223C639-F8B3-4554-BA21-D81A6E58B0F2.jpeg
    167.4 KB · Views: 2,636
  • A17A313A-4773-4435-B77D-8FEA2D278D5E.jpeg
    A17A313A-4773-4435-B77D-8FEA2D278D5E.jpeg
    280.7 KB · Views: 2,636
Shane N.":145gzmqq said:
These plows will probably get some hot patches welded on them. They’re 12” super chief bottoms and it’ll cost more for parts than they are worth.
There is probably a 4 or 5-bottom plow with decent Super Chief bottoms on it waiting to be sold at an auction for about scrap price. One with 12-inch bottoms may be hard to find.

This looks like a 296 plow, fairly rare model.
 
Shane N.":85yf21lb said:
This thing will be getting the FH prong cut off and going to the scrapper.

I would find a use for that, driveways, foodplots, garden. I understand you have a plethora of implements you have secured but I find that thing useful ;)
 
Jim Becker":373v7y70 said:
Shane N.":373v7y70 said:
These plows will probably get some hot patches welded on them. They’re 12” super chief bottoms and it’ll cost more for parts than they are worth.
There is probably a 4 or 5-bottom plow with decent Super Chief bottoms on it waiting to be sold at an auction for about scrap price. One with 12-inch bottoms may be hard to find.

This looks like a 296 plow, fairly rare model.
I had a 3-12" IH plow with a 3 pt. hitch on it a few years ago and couldn't find wear parts for them either, they were almost as bad as these. I have one moldboard from a chief bottom I may be able to cut and make work on one of them. Thanks for the info!
 
Indy4570":13613tss said:
Shane N.":13613tss said:
This thing will be getting the FH prong cut off and going to the scrapper.

I would find a use for that, driveways, foodplots, garden. I understand you have a plethora of implements you have secured but I find that thing useful ;)
I bought the disc and the rest came with it, lol. I have no use for the spike thing :lol:
 
Shane N.":29hocjo9 said:
Jim Becker":29hocjo9 said:
Shane N.":29hocjo9 said:
These plows will probably get some hot patches welded on them. They’re 12” super chief bottoms and it’ll cost more for parts than they are worth.
There is probably a 4 or 5-bottom plow with decent Super Chief bottoms on it waiting to be sold at an auction for about scrap price. One with 12-inch bottoms may be hard to find.

This looks like a 296 plow, fairly rare model.
I had a 3-12" IH plow with a 3 pt. hitch on it a few years ago and couldn't find wear parts for them either, they were almost as bad as these. I have one moldboard from a chief bottom I may be able to cut and make work on one of them. Thanks for the info!

Have you checked with Ploworx for the parts?
 
AL Farmall Boy":38vaweq9 said:
Shane N.":38vaweq9 said:
Jim Becker":38vaweq9 said:
There is probably a 4 or 5-bottom plow with decent Super Chief bottoms on it waiting to be sold at an auction for about scrap price. One with 12-inch bottoms may be hard to find.

This looks like a 296 plow, fairly rare model.
I had a 3-12" IH plow with a 3 pt. hitch on it a few years ago and couldn't find wear parts for them either, they were almost as bad as these. I have one moldboard from a chief bottom I may be able to cut and make work on one of them. Thanks for the info!

Have you checked with Ploworx for the parts?
I talked with them about a share for a Cub plow, the shipping was almost as much as the share :shock:

I can't see putting $300-$400+ in wear parts on a plow, there are too many for sale in the $200-$275 range in good shape :D
 
When I need the prong off the lister I know where it is. This drag thing is a mess, it’s going to the scrapper tomorrow.
 

Attachments

  • 34A2045A-B51B-442F-91A6-260E853C2BA0.jpeg
    34A2045A-B51B-442F-91A6-260E853C2BA0.jpeg
    172.2 KB · Views: 2,477
  • E4141576-7C19-4A5B-8A97-AA654075C2E8.jpeg
    E4141576-7C19-4A5B-8A97-AA654075C2E8.jpeg
    103.8 KB · Views: 2,477
Back
Top