What happened at work today.

Powdercoater sent me these. He blasted it and primed it. Wondering what color the top coat is, he won’t tell me.
 

Attachments

  • B485B717-10B1-4B24-BF3E-2CD9D9B88A4C.jpeg
    B485B717-10B1-4B24-BF3E-2CD9D9B88A4C.jpeg
    232.3 KB · Views: 6,382
  • 6D4AFBF3-9554-461D-8B2A-4ADA9EEDB176.jpeg
    6D4AFBF3-9554-461D-8B2A-4ADA9EEDB176.jpeg
    126.8 KB · Views: 6,382
Been machining some 4” od 316 stainless.
 

Attachments

  • 9E0151C8-8DB9-4929-A706-54BA5D7ADBC1.jpeg
    9E0151C8-8DB9-4929-A706-54BA5D7ADBC1.jpeg
    145.7 KB · Views: 6,341
  • 36FB5C83-03D7-4D7A-B260-2FDADFC5C463.jpeg
    36FB5C83-03D7-4D7A-B260-2FDADFC5C463.jpeg
    173.2 KB · Views: 6,341
Missed a decimal point. Big difference in sending a tap .500” deep and 5.000” deep. Yes, that’s stainless. Oops.
 

Attachments

  • 75020724-39BA-4CC5-B7D7-F58097686BBA.jpeg
    75020724-39BA-4CC5-B7D7-F58097686BBA.jpeg
    172 KB · Views: 5,963
  • 7B272E81-53DA-4B09-A959-6A1908B3F0B1.jpeg
    7B272E81-53DA-4B09-A959-6A1908B3F0B1.jpeg
    95.2 KB · Views: 5,963
tst":5t1q5neg said:
but the Kurt Vise held under the pressure! they are a good vise
They are good vises. The part didn’t come out, the servo finally kicked off on the machine when the pressure got to be to high.
 
Working our store today and looked out the back window and noticed one of our goats eating, the lazy way.
 

Attachments

  • A3CDC1E8-37B8-4C4B-BEED-5CFB498F78E9.jpeg
    A3CDC1E8-37B8-4C4B-BEED-5CFB498F78E9.jpeg
    230.3 KB · Views: 5,909
Shane N.":pwxicrq9 said:
Missed a decimal point. Big difference in sending a tap .500” deep and 5.000” deep. Yes, that’s stainless. Oops.

When I was building the Bullard vertical turret lathes the last operation was to bore the center of the chuck hole to line up fixtures. A mistake on the hand held pendant between the .001” and .010” plus how many times you pushed the button one must be aware. I used a indicator too. Just Incase I made a mistake. I seen others make a mistake on this tight tolarences hole and they ended up installing a steel ring in the bore.

Each machine we built had different CNC controllers. Some had leading zeros, trailing zeros, decimal point, no decimal point. Some controllers were marked temporary with masking tape what they were. Some had no marking. I finally wrote the whole program with it all and it ran. Much faster than waiting for the programmer to tell me what it was.

I had one CNC machine take off by itself. I was doing the head alignment and had my back to the machine when I heard the servo motor running. I turned around and the head was moving by itself. I hit the e stop on the controller and it continued by itself. I ran to the main cabinet and pulled the power lever to off it stopped. Could of been worse there was no cams on the limit switches yet. That would of been a nice crash. You had to be alert all the time.
 
Not everything I make is pretty, lol. I made a pony tank for this Cub a man is supposed to be coming after out of an old weedeater tank. I could only find some 1/4” air line fittings. It worked. Tractor hasn’t been cranked since last July and I put a little gas in it after charging the 6V battery and it fired right up and had good oil pressure.
 

Attachments

  • 9992FDB9-BF9F-49F1-AFEB-DA69900A14CB.jpeg
    9992FDB9-BF9F-49F1-AFEB-DA69900A14CB.jpeg
    238.6 KB · Views: 5,798
  • 305A54D0-9222-4A83-829C-ED0F887A1327.jpeg
    305A54D0-9222-4A83-829C-ED0F887A1327.jpeg
    131.2 KB · Views: 5,798
  • 7FE89296-C5E8-4314-BAC7-A502A9DC23A0.jpeg
    7FE89296-C5E8-4314-BAC7-A502A9DC23A0.jpeg
    214.9 KB · Views: 5,798
Been loaded up for 5 days waiting on the wind to die down. Today was the day. Sprayed 375 gallons with remedy ultra to kill briars and small trees. I could really tell what I missed last year. The trailer was glad the water is off. Had 275 gallons in the tank on front and 100 on the back.
 

Attachments

  • 97BD9C5A-95D9-4D23-BB2D-FAF31F712E80.jpeg
    97BD9C5A-95D9-4D23-BB2D-FAF31F712E80.jpeg
    187.5 KB · Views: 5,791
  • 9D29116A-B6C1-4641-8902-050D43DADAFD.jpeg
    9D29116A-B6C1-4641-8902-050D43DADAFD.jpeg
    148.9 KB · Views: 5,791
I been looking for a deal on a good tillage tool. Either a 7 shank fast hitch for the 140 or a 9 shank 3 point hitch for the 4630. My dad bought a couple tractors from a friend recently and ask me was I still looking for a tillage tool. I said yeah, he sold me this one for about half of what it should have been. All this one needs is some paint and new points. Happy over here!

I know this one isn't hurt. The man who had it pulled it behind a 601 Ford with 600ish original hours on it and he's been dead for 16+ years.
 

Attachments

  • 8BECC725-A569-4146-941A-07A77A4F6559.jpeg
    8BECC725-A569-4146-941A-07A77A4F6559.jpeg
    345 KB · Views: 5,327
  • AE293A6A-4952-4A2D-9E00-9423715834AF.jpeg
    AE293A6A-4952-4A2D-9E00-9423715834AF.jpeg
    355.3 KB · Views: 5,327
  • 386138A7-1E6C-4D49-8F99-04AB0D8B8836.jpeg
    386138A7-1E6C-4D49-8F99-04AB0D8B8836.jpeg
    344.1 KB · Views: 5,327
ajhbike":1pnth3ld said:
That is a nice one...is it a Dearborn?
I’m not sure if it is or not. I found a ford decal on it but it doesn’t look original. Can’t find a tag anywhere or any small holes where one would have been.
 

Attachments

  • 74B56063-0115-432C-80A7-1F760E9A3A12.jpeg
    74B56063-0115-432C-80A7-1F760E9A3A12.jpeg
    220.8 KB · Views: 5,297
I went down to mom and dads barn and got dads tractor with the loader and loaded the tillage tool and when I got off I saw a stream divider on the shelf. He came out talking to me and I ask him if he wanted to get rid of it, he said yeah I’m not going to use it :D
 

Attachments

  • 46F088F9-0212-45A5-A1A0-F516411FF6D9.jpeg
    46F088F9-0212-45A5-A1A0-F516411FF6D9.jpeg
    98.3 KB · Views: 5,295
  • A3E85120-572F-4179-BD15-CB8F2E1D8F4A.jpeg
    A3E85120-572F-4179-BD15-CB8F2E1D8F4A.jpeg
    150 KB · Views: 5,295
  • E8D00F62-C8E4-41EE-9CFE-F3186DEC6FAB.jpeg
    E8D00F62-C8E4-41EE-9CFE-F3186DEC6FAB.jpeg
    116.8 KB · Views: 5,295
This thing has very little wear other than the points. Here’s a picture of the spring holder as well. What kind is it?
 

Attachments

  • 39341B27-7804-43CE-AD72-A9ADE381101E.jpeg
    39341B27-7804-43CE-AD72-A9ADE381101E.jpeg
    140.4 KB · Views: 5,285
  • E3F16D25-E361-40D1-8B55-765A923981E4.jpeg
    E3F16D25-E361-40D1-8B55-765A923981E4.jpeg
    128.3 KB · Views: 5,285
  • 5315C15E-32FF-4514-B513-37C5CC23ABC8.jpeg
    5315C15E-32FF-4514-B513-37C5CC23ABC8.jpeg
    180.4 KB · Views: 5,285
My dad gave this John Deere 110 to our son when he was a year old. He’s been driving it by himself a lot here lately. He loves it. Baby girl wanted to help give it a bath. It had been sitting for several years untouched in our building, I put a new battery in it and off he went. Had to add some new gas after a couple days of driving. The deck for it is in the building. I've used it with the trac-vac hooked to it to get leaves up in the past.
 

Attachments

  • F6A25551-AFBB-4884-BF96-A85BB6153068.jpeg
    F6A25551-AFBB-4884-BF96-A85BB6153068.jpeg
    232.9 KB · Views: 4,417
  • 5FC9EBED-1BF4-4F73-93EA-F93C8F7352E4.jpeg
    5FC9EBED-1BF4-4F73-93EA-F93C8F7352E4.jpeg
    239 KB · Views: 4,417
My cousins had a bad day at work the other day. Father and son, they have their own logging business. They had a guy helping them and was hauling a loaded trailer and turned on a road and ran the rear axle in the ditch and turned the trailer over. The truck was 90 degrees to it and didn't get turned over and the trailer didn't come unhooked. Look at the uprights and you can see the twist. They have it at a frame shop gonna try and salvage it.
 

Attachments

  • 08702864-EFA9-42E7-8B1E-D352A68B1496.jpeg
    08702864-EFA9-42E7-8B1E-D352A68B1496.jpeg
    197.4 KB · Views: 4,332
Bob McCarty":1zr6tzyj said:
I can see a miniature percolating in your mind..... :D
It is now, our son would love it. I have two trailer axles at work I salvaged off one of his other trailers I been wanting to do something with. Thanks for the idea Bob!
 
Back
Top