What happened at work today.

Was just looking at the calendar and it’s 359 days until Christmas 2019 and the neighbor has already gotten all of his decorations up. I used to think that thanksgiving was early to have them up :lol:
 
Put this IH 100 blade on the operating table.

This one clearly has a “100” decal under the International decal, I can’t find any pictures on the web of one with the 100 on it. Did they only put them on there in the later years or what? I got this blade with an IH Danco C-2 mower and it is later than another one I had. The identification plates were different on the two mowers, the one I recently acquired, the tag is like the one on this blade that has the U-111. The other mower had a larger plate with Danco C-2 on it.
 

Attachments

  • EF95F2E8-5C9E-4C5B-BE35-18F0CC3154D6.jpeg
    EF95F2E8-5C9E-4C5B-BE35-18F0CC3154D6.jpeg
    153.8 KB · Views: 1,217
  • 05B8E565-3A57-4470-8EBB-08FD025495B1.jpeg
    05B8E565-3A57-4470-8EBB-08FD025495B1.jpeg
    265.3 KB · Views: 1,217
  • 4A1E5BBA-850D-40DF-8F15-9D79332DB071.jpeg
    4A1E5BBA-850D-40DF-8F15-9D79332DB071.jpeg
    148.2 KB · Views: 1,217
  • 4908DFB0-C701-4C9F-8027-A92E72B6AEFD.jpeg
    4908DFB0-C701-4C9F-8027-A92E72B6AEFD.jpeg
    208.3 KB · Views: 1,217
  • DC9BCEA5-FE15-4C06-821C-A7010D092DBB.jpeg
    DC9BCEA5-FE15-4C06-821C-A7010D092DBB.jpeg
    156.9 KB · Views: 1,217
tst":3c11rtfu said:
these came in yellow also, on the other end it had the IH decal/logo about 6x6"
Thanks Tim, do you make these decals with the 100 decal also? If so can you send me a price? Thanks!
 
Shane,
Here's what mine looks like;
normal_1_PT_Rear_Grader_Blade_rear.JPG


No evidence of the numeral "100" or the tag. Mine came with a 1957 International Cub LoBoy I had for a short time.

Peter
 
This blade was rusted tight from sitting outside. I had it on the Cub and had to use a long pry bar to turn it around. Had to use the hot wrench to get it separated. Got the tag off and cleaned as well.
 

Attachments

  • B32D1BB8-9EAB-46EC-BB34-1F1BBDE411EF.jpeg
    B32D1BB8-9EAB-46EC-BB34-1F1BBDE411EF.jpeg
    97.2 KB · Views: 1,205
  • A2554E5A-3F3A-4B12-991C-FDE1A71A0321.jpeg
    A2554E5A-3F3A-4B12-991C-FDE1A71A0321.jpeg
    174.7 KB · Views: 1,205
Peter Person":ac5hz3l5 said:
Shane,
Here's what mine looks like;
normal_1_PT_Rear_Grader_Blade_rear.JPG


No evidence of the numeral "100" or the tag. Mine came with a 1957 International Cub LoBoy I had for a short time.

Peter
When you do a search on "IH 100 blade" that picture is one of the first ones to come up. Thanks!
 
Shane Nelson":2lejybal said:
Put this IH 100 blade on the operating table.


YESSSS!! I can't wait to see what you make of this one! I've had a few of those over the years and wish I would have kept one. Surely I'll find another soon. Should be a pretty easy restore. The ones I've seen/had were like yours Shane. International on the left side with 100 under it. The IH logo on the right side. I don't recall seeing ID Tags or not.
 
AL Farmall Boy":2sx9ssfr said:
Shane Nelson":2sx9ssfr said:
Put this IH 100 blade on the operating table.


YESSSS!! I can't wait to see what you make of this one! I've had a few of those over the years and wish I would have kept one. Surely I'll find another soon. Should be a pretty easy restore. The ones I've seen/had were like yours Shane. International on the left side with 100 under it. The IH logo on the right side. I don't recall seeing ID Tags or not.
The hard work is done for me, I’m taking this one to be burned, blasted & powder coated :D
I did get the edge of the blade straightened out.
 

Attachments

  • 2D05B193-EA5A-47B4-A612-57E2850F833B.jpeg
    2D05B193-EA5A-47B4-A612-57E2850F833B.jpeg
    136.2 KB · Views: 1,176
  • BCB2C472-671E-4157-A7DE-FD941878EA6A.jpeg
    BCB2C472-671E-4157-A7DE-FD941878EA6A.jpeg
    153.8 KB · Views: 1,176
Here’s the parts list if anybody needs it, previously posted by John *.?-!.* cub owner
 

Attachments

  • E6EEB957-3D20-4571-83DC-F1021E499BFA.png
    E6EEB957-3D20-4571-83DC-F1021E499BFA.png
    305.8 KB · Views: 1,180
  • 9087A210-E5D3-4936-8BB7-BF748BC4C44E.png
    9087A210-E5D3-4936-8BB7-BF748BC4C44E.png
    25.4 KB · Views: 1,180
Here's the 2 different plates on the 2 C-2 mowers.
 

Attachments

  • C-2.jpeg
    C-2.jpeg
    49.4 KB · Views: 1,161
  • IMG_7268.JPG
    IMG_7268.JPG
    237.9 KB · Views: 1,161
Shane,
Here's a photo of an IH100 Blade that McGrew Equipment had for sale several years ago. It was nice and clean, so I captured the photos for future reference.
408763781_o.jpg
408763818_o.jpg

This should help in the placement of the decals on yours.

Peter
 
Peter Person":1puzzt84 said:
Shane,
Here's a photo of an IH100 Blade that McGrew Equipment had for sale several years ago. It was nice and clean, so I captured the photos for future reference.
408763781_o.jpg
408763818_o.jpg

This should help in the placement of the decals on yours.

Peter
Thank you so much. You can see the ID plate on it too. Any idea what they were asking for that one?
 
Shane Nelson":2fora7oo said:
Peter Person":2fora7oo said:
Shane,
Here's a photo of an IH100 Blade that McGrew Equipment had for sale several years ago. It was nice and clean, so I captured the photos for future reference.
408763781_o.jpg
408763818_o.jpg

This should help in the placement of the decals on yours.

Peter
Thank you so much. You can see the ID plate on it too. Any idea what they were asking for that one?


Shane,
That was back in Sept 2010, I can't recall what they wanted for it.
Peter
 
Took the blade over to get painted and decided to drill and tap a 5/16-18 hole in the bottom of the shaft. I may make a heavy washer and put a bolt in it instead of reusing this clip. We’ll see.
 

Attachments

  • 3E1429B8-6451-4FC7-9145-3A6B4D890EA2.jpeg
    3E1429B8-6451-4FC7-9145-3A6B4D890EA2.jpeg
    235.3 KB · Views: 1,428
  • 3EFC8DEC-5252-4CCE-B1C5-E2A420DA36CD.jpeg
    3EFC8DEC-5252-4CCE-B1C5-E2A420DA36CD.jpeg
    112.5 KB · Views: 1,428
  • 41ABFD17-13B7-46DC-A22C-677F2BB50899.jpeg
    41ABFD17-13B7-46DC-A22C-677F2BB50899.jpeg
    80.9 KB · Views: 1,428
Made a new cutting edge from a piece of 5/16”x 2 1/2” instead of the standard 3/16” thick IH put on. Seems flimsy to me being that thin. Also countersunk the holes so I can put flat head bolts and have a smooth edge instead of carriage bolts with a raised head. Carried it to be painted black.
 

Attachments

  • 499CDFB1-3F9C-4DAA-AB26-68A28A858EDA.jpeg
    499CDFB1-3F9C-4DAA-AB26-68A28A858EDA.jpeg
    103.3 KB · Views: 1,428
  • 69C443F6-F7B9-4F84-99C8-3063CE623BC4.jpeg
    69C443F6-F7B9-4F84-99C8-3063CE623BC4.jpeg
    139.9 KB · Views: 1,428
  • 7A735A59-917F-4DEE-8047-924B46E81B35.jpeg
    7A735A59-917F-4DEE-8047-924B46E81B35.jpeg
    131.5 KB · Views: 1,428
  • F6A58F82-AE74-4D5A-8B35-58E33A8DC95F.jpeg
    F6A58F82-AE74-4D5A-8B35-58E33A8DC95F.jpeg
    135.8 KB · Views: 1,428
Back and black.
 

Attachments

  • 1B03193B-377B-416B-9D0B-254B4CF8C957.jpeg
    1B03193B-377B-416B-9D0B-254B4CF8C957.jpeg
    112.9 KB · Views: 1,399
  • B9B7DEB6-5BA9-467D-BDEF-2A45F265D2FF.jpeg
    B9B7DEB6-5BA9-467D-BDEF-2A45F265D2FF.jpeg
    267.2 KB · Views: 1,399
Back
Top