What happened at work today.

Made 2 stainless pins for the hole digger I been redoing. These are normal size :lol:
 

Attachments

  • 856E0405-C7C5-4E51-8365-57E2DD0BBEE5.jpeg
    856E0405-C7C5-4E51-8365-57E2DD0BBEE5.jpeg
    240.3 KB · Views: 7,464
  • F1F469E3-5131-4949-AAB4-570E30C5BC70.jpeg
    F1F469E3-5131-4949-AAB4-570E30C5BC70.jpeg
    138 KB · Views: 7,464
  • 5C5BA92D-86AE-4801-AE12-E3C418DD42A1.jpeg
    5C5BA92D-86AE-4801-AE12-E3C418DD42A1.jpeg
    127 KB · Views: 7,464
Been messing with some fertilizer assembly parts. I bought this complete unit minus the hopper from a forum member and had to modify the bar that goes to the final because I have the old style handle on the FH. Decided to just make a new bar instead of hacking up an original one.
 

Attachments

  • 7C807E68-9D0F-4CB9-BB01-C8A9D50F0435.jpeg
    7C807E68-9D0F-4CB9-BB01-C8A9D50F0435.jpeg
    145.4 KB · Views: 7,414
  • CA7DC75D-CB1E-4566-A273-7FE08E4AA509.jpeg
    CA7DC75D-CB1E-4566-A273-7FE08E4AA509.jpeg
    183 KB · Views: 7,414
  • 20BBE295-F479-4A31-8BEF-46D66BB69A92.jpeg
    20BBE295-F479-4A31-8BEF-46D66BB69A92.jpeg
    189 KB · Views: 7,414
  • 0606F60B-E54E-4427-AC82-B5BBF1D35E22.jpeg
    0606F60B-E54E-4427-AC82-B5BBF1D35E22.jpeg
    179.7 KB · Views: 7,414
I’ve had this piece of a fertilizer assembly in the building for years and know it would cost more to complete it than it’s worth. I had a complete Cole fertilizer assembly for a Cub and I never did like it cause it was bulky and couldn’t see good with it on. Been wanting to find an IH one and sell that one. I put the Cole on Craigslist after buying the complete IH one and a man called me and said he had a piece of an IH one the hopper goes on and wanted to know if I’d take it on trade. Long story short we traded and I got my money back out of what I paid for the Cole 8 years ago. I had a gear, made the triangle piece and now got to come up with 2 idler gears and a bearing for the other end of the drive shaft and will have another complete unit minus the hopper.
 

Attachments

  • A644B1FE-9275-476E-B09A-C9E6F3F57F6F.jpeg
    A644B1FE-9275-476E-B09A-C9E6F3F57F6F.jpeg
    147.2 KB · Views: 7,414
  • 7794433D-E7BC-42F9-A1F3-C754127D103F.jpeg
    7794433D-E7BC-42F9-A1F3-C754127D103F.jpeg
    163.8 KB · Views: 7,414
  • 9145CA77-4B56-4422-8864-D26BF53167CF.jpeg
    9145CA77-4B56-4422-8864-D26BF53167CF.jpeg
    152.7 KB · Views: 7,414
  • 0A40AEAD-1D94-413C-A5EA-FC21103F85A2.jpeg
    0A40AEAD-1D94-413C-A5EA-FC21103F85A2.jpeg
    141.4 KB · Views: 7,414
  • 96317DCA-DB71-4FCC-9290-C2BB44D09530.jpeg
    96317DCA-DB71-4FCC-9290-C2BB44D09530.jpeg
    140.3 KB · Views: 7,414
  • 91C7E884-9C6C-4894-82AA-B0BE8EB60640.jpeg
    91C7E884-9C6C-4894-82AA-B0BE8EB60640.jpeg
    164.1 KB · Views: 7,414
Turned the idler pulleys around and it clears. Can only adjust the handle 2 notches with it on but while the cultivators are on it don’t need adjusting much anyway.
 

Attachments

  • A5FEA80F-9C0C-4BA1-BB59-7285FAEC69F6.jpeg
    A5FEA80F-9C0C-4BA1-BB59-7285FAEC69F6.jpeg
    164 KB · Views: 7,379
  • 0445DC17-22FD-40AD-B7A5-23E51A33A38A.jpeg
    0445DC17-22FD-40AD-B7A5-23E51A33A38A.jpeg
    142.3 KB · Views: 7,379
  • 30A62083-966B-41B8-8E42-7444908C01AD.jpeg
    30A62083-966B-41B8-8E42-7444908C01AD.jpeg
    108.3 KB · Views: 7,379
Made a cup holder for the 4630 to hold my water or coffee, made it on an angle to fit the loader bracket because it doesn’t vibrate like the fender. The angles already had slots in them from another job.
 

Attachments

  • 5442B33B-2119-4CB5-B0BC-FC190F2F3904.jpeg
    5442B33B-2119-4CB5-B0BC-FC190F2F3904.jpeg
    135.2 KB · Views: 6,034
  • F5A228C5-B433-4B5F-A76F-7BD95B026799.jpeg
    F5A228C5-B433-4B5F-A76F-7BD95B026799.jpeg
    135.7 KB · Views: 6,034
  • 0D172178-F607-4835-9243-CB96EC7E9546.jpeg
    0D172178-F607-4835-9243-CB96EC7E9546.jpeg
    144.9 KB · Views: 6,034
  • 826C7956-E925-4F82-A5B4-F0A74061690D.jpeg
    826C7956-E925-4F82-A5B4-F0A74061690D.jpeg
    152.8 KB · Views: 6,034
  • 52DCC6E9-EC54-48D5-BD58-C40E31C21890.jpeg
    52DCC6E9-EC54-48D5-BD58-C40E31C21890.jpeg
    177.6 KB · Views: 6,034
  • 8F29F2AF-BDA1-4F2B-9CD9-F2C3244D7408.jpeg
    8F29F2AF-BDA1-4F2B-9CD9-F2C3244D7408.jpeg
    167.6 KB · Views: 6,034
Got the sprayer going too!
 

Attachments

  • 3081D497-5CB4-4919-B9BF-35D604D3453E.jpeg
    3081D497-5CB4-4919-B9BF-35D604D3453E.jpeg
    134 KB · Views: 6,032
  • 2642729F-8EDC-4221-BEAD-295FA3FFE320.jpeg
    2642729F-8EDC-4221-BEAD-295FA3FFE320.jpeg
    280 KB · Views: 6,032
Also changed the front tires/wheels on our mower. Northern Tool had flat free tires/wheels on sale and in the long run they were cheaper than putting tubes in the dry rotted tires that kept going flat. They do ride rougher though.
 

Attachments

  • A4D195CB-A91D-45D0-81E1-F7D25B9447CE.jpeg
    A4D195CB-A91D-45D0-81E1-F7D25B9447CE.jpeg
    162.9 KB · Views: 6,023
  • 99674244-424D-4EA2-9293-61FF0FADC7BB.jpeg
    99674244-424D-4EA2-9293-61FF0FADC7BB.jpeg
    226 KB · Views: 6,023
I got to stop going by my friends house, lol. Stopped by there and ask to borrow a spreader to sow some beans next week and he ask if I needed a project and I wound up with this. The price was right, it needs a new ejector disk and some tlc.
 

Attachments

  • 936956FA-D992-499A-BA3F-6CEF32B8DDE4.jpeg
    936956FA-D992-499A-BA3F-6CEF32B8DDE4.jpeg
    157.4 KB · Views: 5,972
  • 6B5F374C-1DB2-4DDF-842D-2000B29EC152.jpeg
    6B5F374C-1DB2-4DDF-842D-2000B29EC152.jpeg
    136.5 KB · Views: 5,972
  • D4BC8629-C978-46BB-8EAF-BD1E938E5268.jpeg
    D4BC8629-C978-46BB-8EAF-BD1E938E5268.jpeg
    149.3 KB · Views: 5,972
  • A2076283-DDEB-4A2C-A100-539D965187F4.jpeg
    A2076283-DDEB-4A2C-A100-539D965187F4.jpeg
    143.3 KB · Views: 5,972
  • 6FDB9F07-C6B1-4BA7-A38A-FDC00A180165.jpeg
    6FDB9F07-C6B1-4BA7-A38A-FDC00A180165.jpeg
    151.4 KB · Views: 5,972
  • 61AB1718-DEAD-4F0A-9FAC-485C20B7215C.jpeg
    61AB1718-DEAD-4F0A-9FAC-485C20B7215C.jpeg
    174.1 KB · Views: 5,972
I’m glad he has another one I can borrow, this may take a while
 

Attachments

  • 555FE1B7-AE14-4111-B4D9-1D223F726D9F.jpeg
    555FE1B7-AE14-4111-B4D9-1D223F726D9F.jpeg
    150.2 KB · Views: 5,972
  • 7BD75015-31F9-4066-A1EA-CCA8B0C03897.jpeg
    7BD75015-31F9-4066-A1EA-CCA8B0C03897.jpeg
    160.1 KB · Views: 5,972
  • 3D684478-0855-48DE-9674-C15DB30FBC63.jpeg
    3D684478-0855-48DE-9674-C15DB30FBC63.jpeg
    154.1 KB · Views: 5,972
  • 6D2947DB-612A-4E13-9901-459EDFE13F90.jpeg
    6D2947DB-612A-4E13-9901-459EDFE13F90.jpeg
    160 KB · Views: 5,972
  • 90781F04-4F89-4577-BA2D-225C181A5E90.jpeg
    90781F04-4F89-4577-BA2D-225C181A5E90.jpeg
    186.1 KB · Views: 5,972
Hello sir. I didn't even know about these things. It looks you have heavier gage and considering rolling the outer diameter. Things tend to rot at the top and skirts are easily made replacements. I have the head roller section and everything is in increments. It is gentle bend then more then forming. All highly compressed. Then tack on those skirts. Easy to say but like what you are doing. :)
 
Took this on the way to work. It amazes me how quickly it changes.
 

Attachments

  • CC02DD4F-8193-4820-A340-6EC8DEC0A0A8.jpeg
    CC02DD4F-8193-4820-A340-6EC8DEC0A0A8.jpeg
    130.7 KB · Views: 5,892
Shane Nelson":hozitlk8 said:
...Northern Tool had flat free tires/wheels on sale...

Had to read this twice as I saw it the other way around and was thinking, "I have some free flat tires at my house already". :{_}:
 
Working on this rottenness. Getting there.
 

Attachments

  • B4F5C4E2-B280-45CE-85F1-A95CEB3CEDC7.jpeg
    B4F5C4E2-B280-45CE-85F1-A95CEB3CEDC7.jpeg
    164.2 KB · Views: 5,829
  • 2BD03D1C-7799-46DF-9506-F549AD6E686B.jpeg
    2BD03D1C-7799-46DF-9506-F549AD6E686B.jpeg
    154.7 KB · Views: 5,829
  • 0768772D-6310-4BCE-80ED-3A396DF47F76.jpeg
    0768772D-6310-4BCE-80ED-3A396DF47F76.jpeg
    166.7 KB · Views: 5,829
  • 443321FF-4A3D-4819-93CC-E7D8B1CE7892.jpeg
    443321FF-4A3D-4819-93CC-E7D8B1CE7892.jpeg
    161.4 KB · Views: 5,829
  • 8810B38D-5A9E-4EA8-BA19-017EBCD178F5.jpeg
    8810B38D-5A9E-4EA8-BA19-017EBCD178F5.jpeg
    158.9 KB · Views: 5,829
Started getting the cross piece on for the gearbox. Put the spreader back together upside down so I could get it centered.
 

Attachments

  • 0264183E-C2A6-4837-8476-E41D691181B1.jpeg
    0264183E-C2A6-4837-8476-E41D691181B1.jpeg
    136.5 KB · Views: 5,776
  • 33196640-CF81-4682-8BA9-E4278BF23C5B.jpeg
    33196640-CF81-4682-8BA9-E4278BF23C5B.jpeg
    161.6 KB · Views: 5,776
Also pulled this out of the dumpster along with a brake controller for a truck. I find the coolest stuff in there at times.
 

Attachments

  • 57C1DE8D-3035-4ECF-82F0-542BE0AE4A67.jpeg
    57C1DE8D-3035-4ECF-82F0-542BE0AE4A67.jpeg
    184.5 KB · Views: 5,776
Got a bearing made for this countershaft.
 

Attachments

  • 61A94E8A-5BA2-4262-A4F1-288759DC712A.jpeg
    61A94E8A-5BA2-4262-A4F1-288759DC712A.jpeg
    123.2 KB · Views: 5,720
  • 41EB6350-3F4E-4B37-91ED-5AF9E854DFE0.jpeg
    41EB6350-3F4E-4B37-91ED-5AF9E854DFE0.jpeg
    169.7 KB · Views: 5,720
  • ACC9900D-CAEC-42A5-B4FE-3B9FF5702304.jpeg
    ACC9900D-CAEC-42A5-B4FE-3B9FF5702304.jpeg
    159.5 KB · Views: 5,720
Took this to see the powdercoat friend.
 

Attachments

  • F5C87839-595A-4A7E-B6D1-C7A132557017.jpeg
    F5C87839-595A-4A7E-B6D1-C7A132557017.jpeg
    177.1 KB · Views: 5,678
  • 793A0A55-1E6B-4359-9B4A-092A638DECBA.jpeg
    793A0A55-1E6B-4359-9B4A-092A638DECBA.jpeg
    153.8 KB · Views: 5,678
Made a new serial plate for this Lely spreader.
 

Attachments

  • 1A4BC697-23A6-4A57-BF4C-E0C0651F8B94.jpeg
    1A4BC697-23A6-4A57-BF4C-E0C0651F8B94.jpeg
    207.5 KB · Views: 5,638
  • 75F159AC-FFB2-4AF5-BBE7-8D1EE52C828F.jpeg
    75F159AC-FFB2-4AF5-BBE7-8D1EE52C828F.jpeg
    136.3 KB · Views: 5,638
  • E0ECE151-4BA4-491C-B468-4D75BB9B11C2.jpeg
    E0ECE151-4BA4-491C-B468-4D75BB9B11C2.jpeg
    165.1 KB · Views: 5,638
  • 625CD933-6C3A-4722-B0BD-F3C2363D27DE.jpeg
    625CD933-6C3A-4722-B0BD-F3C2363D27DE.jpeg
    159.1 KB · Views: 5,638
Back
Top