What happened at work today.

Fixed our sons forks where his sister stepped on them and broke one off.
 

Attachments

  • 2ED52B4A-5FBE-431C-8115-5DE86878D951.jpeg
    2ED52B4A-5FBE-431C-8115-5DE86878D951.jpeg
    123.1 KB · Views: 10,730
Our son got some tie downs and been hauling his loader around on the trailer I made him. The John Deere was mine when I was a kid. I got it when I was about 11 in Illinois going to see my uncle graduate boot camp from the Navy, it’s the only one that survived my childhood because the rest were worn out. We didn’t have much back then.
 

Attachments

  • B8CA70B1-0FC1-49D5-8D36-7D6594095A7C.jpeg
    B8CA70B1-0FC1-49D5-8D36-7D6594095A7C.jpeg
    239.3 KB · Views: 10,639
Looks like the one my boys have.
Got theirs at a children's home benefit auction in 1998 when Erik was 6 and Aron was 3 1/2.
"Big Bud"

Still have my Tonka bulldozer and loader/backhoe, both with the rubber tracks from when I was a kid. They're at least 50 years old.

Peter
 
Shane Nelson":30m435sj said:
We didn’t have much back then.
That I can relate to. If we hung up Christmas stocking before Christmas. they would be filled with cockelburs. It wasn't until we moved into town that we had a flush toilet, electricity, running hot water. A bit later we receive a hand me down 12" round TV set from a relative in Chicago, only one channel.

We used to play ball in the street. Not a whole of traffice at that time. And under the street light at night.
 
Saw the neighbor across the street from work scrapping a Chevrolet truck. I ask him what he wanted for the spare tire winch. He said $5. I have plans for it.
 

Attachments

  • F3598B03-63C1-45A4-AC1B-3D97166B9C90.jpeg
    F3598B03-63C1-45A4-AC1B-3D97166B9C90.jpeg
    190.5 KB · Views: 10,470
This just happened in front of work. Train vs. 18 wheeler. Train wins............again.
Hope everyone is okay!
 

Attachments

  • FB1370D6-446B-4A2B-8BA2-2C0A7E93F357.jpeg
    FB1370D6-446B-4A2B-8BA2-2C0A7E93F357.jpeg
    221.4 KB · Views: 10,463
Got the spare tire bracket made. Off to paint.
 

Attachments

  • F00ED241-62F9-4838-81E4-A7F15F88D684.jpeg
    F00ED241-62F9-4838-81E4-A7F15F88D684.jpeg
    186.1 KB · Views: 10,405
  • AC150541-5A64-47ED-9244-72AAB60D0272.jpeg
    AC150541-5A64-47ED-9244-72AAB60D0272.jpeg
    152.7 KB · Views: 10,405
Shane Nelson":14karuon said:
Fired up the 2 Maytag engines, haven't cranked them in several months.
Single cylinder https://www.youtube.com/watch?v=3dM5wDMGAQs
Twin cylinder https://www.youtube.com/watch?v=lOVETwrKJWI
I think the single cylinder may have a bent crank, it dances all over the place but it runs. The twin doesn't move, it's always been one of the best running engines I've had. Owned them both for about 12 years.

Does it mean they have a bent crank when they dance around? We have 2 of the single cylinder Maytags that we bought at an estate sale of an old tractor guy. They were already painted up and in his shop with dust on them. Didn't take much for me to get them running. I know nothing about them really though. One is harder to start than the other.

IMG_9447.JPG

IMG_9446.JPG

That was a really good auction (outside of Nashville, TN) too. We ended up buying a Cub, Super A, (2) Allis Chalmers G tractors, and 2 trailer loads of attachments & parts for the Farmall and A-C tractors. Amongst the stuff we bought I found a notebook binder of forum posts printed out from Yesterdays Tractor. Thought it was pretty neat.
 
Chase, I don't know if it means it's bent or not. I had another single cylinder on a Maytag washing machine and it didn't move, on or off the washer but this one always has.
 
AL Farmall Boy":2r18wobp said:
Shane Nelson":2r18wobp said:
Chase, I don't know if it means it's bent or not. I had another single cylinder on a Maytag washing machine and it didn't move, on or off the washer but this one always has.

Yeah, these dance around just a little when moving. I was thinking it was from the vibration.

https://youtu.be/XAk3VPuiobI

https://youtu.be/tykwj351PBs
This single we have now wouldn't sit on the back of the truck while running.......for long.
 
Got the spare tire carrier back from powdercoat and mounted it under the gooseneck to get it out of the weather. Didn’t feel like welding it so just bolted it.
 

Attachments

  • 5D0A5792-A5AE-43B6-B0E6-17D7E2DDF9DB.jpeg
    5D0A5792-A5AE-43B6-B0E6-17D7E2DDF9DB.jpeg
    219.9 KB · Views: 7,711
  • FA01D5B0-CEE8-40C9-BA2E-E7474232C3C9.jpeg
    FA01D5B0-CEE8-40C9-BA2E-E7474232C3C9.jpeg
    188.3 KB · Views: 7,711
  • 56634135-4665-4FDE-AA47-ECB0B31843D6.jpeg
    56634135-4665-4FDE-AA47-ECB0B31843D6.jpeg
    162.7 KB · Views: 7,711
  • 44B529FE-0C6A-434E-BC45-45817A2F4B61.jpeg
    44B529FE-0C6A-434E-BC45-45817A2F4B61.jpeg
    154.6 KB · Views: 7,711
  • 84F2A9EE-9484-407C-9614-1604D9FE537C.jpeg
    84F2A9EE-9484-407C-9614-1604D9FE537C.jpeg
    139.8 KB · Views: 7,711
:worthy: That's a very clever idea! :worthy:
Curious why you went out the left side though? I would think if you were along a highway somewhere changing a tire, that would be the more dangerous side because of the traffic.
 
Scrivet":3gxnlo1k said:
:worthy: That's a very clever idea! :worthy:
Curious why you went out the left side though? I would think if you were along a highway somewhere changing a tire, that would be the more dangerous side because of the traffic.
I didn’t think about putting it out the right side because of the road, learn from my mistake!
 
Doing a little welding. Lot more to do.
 

Attachments

  • 39ABDB35-35BE-4ACB-8A97-DE3EEF4FCDA2.jpeg
    39ABDB35-35BE-4ACB-8A97-DE3EEF4FCDA2.jpeg
    160.1 KB · Views: 7,608
  • 298EC00E-7F68-4AC7-9595-4C71F6C7E63D.jpeg
    298EC00E-7F68-4AC7-9595-4C71F6C7E63D.jpeg
    194.5 KB · Views: 7,608
Pinned joint anchors? Gosh, I just worked a bunch of structural engineering problems yesterday on the FE exam dealing with those. I don't care to see that stuff again! haha. Looking very good though~!
 
Back
Top