What happened at work today.

Thinned some brand new 27mm Craftsman wrenches for a friend who does hydraulic work.
 

Attachments

  • 55646412-6568-4FD2-B88B-26C2B965091C.jpeg
    55646412-6568-4FD2-B88B-26C2B965091C.jpeg
    130.3 KB · Views: 40,096
You could sell some 13/16" wrenches for the fan shaft, doing that!! I had a machinist friend do one for me...only expected him to use a grinder, which I didn't have at the time. Nooooo...he put it on a moving table thingy that went back and forth removing fractions at a time!! (I'm OBVIOUSLY not a machinist!). Anyway, it looked like a work of art!!
 
Shane Nelson":32lzro9d said:
Thinned some brand new 27mm Craftsman wrenches for a friend who does hydraulic work.

...and when you put a new Craftsman wrench next to an older one, you can really see the thickness difference.
Cheap Chinese steel vs. US alloy steel.

Wouldn't have to thin out the older ones.

Even the new "Made in USA" Craftsman Industrial wrenches are thicker than an older standard Craftsman.

Peter
 
Here’s what the surface grinder does to a wrench.
 

Attachments

  • B9D821DF-CC7F-45BE-9519-883884E83C0B.jpeg
    B9D821DF-CC7F-45BE-9519-883884E83C0B.jpeg
    163.4 KB · Views: 23,416
I spent lots of time running one. I was a newb, apprentice if you will. one common job was a hand full of wrenches would be dropped off with one altered wrench. we were then to alter all the rest to the same specs as the one dropped off. I got to make the little stop signs for inside the Oldsmobile plant in Lansing,MI. Manifest holders, some work on Pontiac Fiero door skin fixtures. Fixtures was our bread n butter there. Almost all of our jobs came from Oldsmobile/GM. One fun project was tearing down old gang air wrenches to make new ones for applications on the then "new" Buick V6 engine. Time on the surface grinder and lathe was fun to me. I still wish I had an old Bridgeport in my shop ;) Always wished I had my own TIG welder after those machinist days too! I didn't last much more than a year there, this ole farm boy was yearning to be outdoors when the sun was bright and I went back to construction to get outside.
 
Played with the mill a little this morning.
 

Attachments

  • FC870F4A-B5F4-4A69-A944-A1A2E8646FB8.jpeg
    FC870F4A-B5F4-4A69-A944-A1A2E8646FB8.jpeg
    204.7 KB · Views: 23,315
Ooooo :shock: is right. If that bottom tag is overall 2" x 1/2", that's the one. I'll do some dremel grinding on the mold and somewhat flush mount the tag and it should be perfect. I may even hinge that side of the mold so it can swing away so there's no hangups on casting removal. You're a genius Shane.
 
Shane made it perfectly clear that he wasn't too excited about production work!
you should replace Shane's name with Rick :D Shane's work is finished :worthy: mine is just beginning, maybe today after the mail is delivered :shock:

I plan today to put these wedges to the test, jacking up the cub in harsh positions to make sure they're bullet proof. Some pics, and it's posting on the "For Sale" forum time. I have roughly 25 sets poured that will be phase 1. When I rework the mold to accept Shane's tag, those will be phase 2.
Rick
 
Finally got around to building one of these platform carriers. Tried to go as original looking as possible. Had to use angle and weld it together then grind it to look formed.
 

Attachments

  • IMG_4942.jpg
    IMG_4942.jpg
    114.7 KB · Views: 23,093
  • IMG_4941.jpg
    IMG_4941.jpg
    127.5 KB · Views: 23,093
  • IMG_4940.jpg
    IMG_4940.jpg
    107.9 KB · Views: 23,093
  • IMG_4939.jpg
    IMG_4939.jpg
    128.5 KB · Views: 23,093
  • IMG_4935.jpg
    IMG_4935.jpg
    127.6 KB · Views: 23,093
  • Platform Carrier.jpg
    Platform Carrier.jpg
    119.5 KB · Views: 23,093
Got the rest built and took it to get powedercoat painted.
 

Attachments

  • IMG_4943.jpg
    IMG_4943.jpg
    97.5 KB · Views: 23,093
  • IMG_4944.jpg
    IMG_4944.jpg
    107.5 KB · Views: 23,093
Back
Top