Unitow Model 75 aircraft tractor

GPPilot

New member
Good morning
I have acquired a Unitow model 75 aircraft tractor and trying to find historical information on it.

Does anybody know these tugs?

I am not sure how to ad pictures
 

Attachments

  • Resized_20230919_083537.jpeg
    Resized_20230919_083537.jpeg
    413.1 KB · Views: 2,009
  • Resized_20230919_083556.jpeg
    Resized_20230919_083556.jpeg
    401.8 KB · Views: 2,009
Just starting the cleaning now. Would like to restore to original if I can find details. It has had many small changes over the years to keep it running.
 
Can you post a photo of the data plate?

CT43fUz.jpg
 
If Chrysler, --probably a 230 like Oliver 525 combines used in them. I used one on my homemade excavator that I made. good motors.
 
In the early '50s, Chrysler Corporation had an Industrial Engine Division that sold engines as "Chrysler Industrial Engines". I would expect a Chrysler engine originally installed in something like the Unitow to have a serial tag showing that name. That leads me to suspect an engine swap some time in the past. It may have been a swap in of a nominally "identical" engine removed from a '53 Plymouth. (On the other hand, I know very little about Chrysler Industrial Engines and my data plate assumption could be wrong.) My data is from 1952 but is probably about right for 1953. Chrysler was marketing seven or eight 6-cylinder engines. The 218 identified as model 5. It was the smallest, rated 52 hp at 2,000 rpm. It was first produced in 1949.

So I guess my question comes down to, does the serial number on the engine's data plate match the serial number on the Unitow serial plate? If it does, you most likely have the original engine and the tractor dates to 1953. If it doesn't match, the engine has been swapped out. The year of the tractor is still likely to be within a few years one way or the other.

Either way, it is a cool piece of machinery. Original or not, the engine data tells you something about the tractor.
 
I dont know if there would be any physical differences to go by to tell "industrial" or "automotive" on these other than the tag itself if they have one. Gotta look at mine and see if I can find the tag and see what is on it. I think it has 230 cast in the top of the head on mine. Oliver 525 combine was a early 60"s model.
 
Back
Top