Tool, what is it ?

What is/are the diameter/s?

Two thoughts. Were sharp edges? Bung hole enlarging tool for barrels. And blacksmith tool for enlarging holes in steel.

Edit: Perhaps reaming the hub for a wooden wheel.
 
I don't have the tool in hand but guess it to be about 3 inches. Comes to a very slight point just enough that you can't stand it on its end without it falling over.
 
Might have been sharp on the end. Next time I see it later this week I'll try to see if the sides could have been sharp.
 
Don’t think it is a drill bit or reamer. You could never get any torque to turn it with the shape of the handle.

Could it have had a mating female part to make it some sort of crusher? Like a mortar and pestle?
 
Looks like a tool my grandpa used when i helped him making home made rope out of used tie yarn +65 years ago.
Grandpa's tool was made of hard wood.
4 minutes into this YouTube video, you can see how rope was made when grandpa was a little boy.
https://youtu.be/U33liPsRUyY
 
john2189":2k956ul4 said:
Gary Dotson":2k956ul4 said:
I think the rope making tool has merit.

I agree, but why would they have made it out of heavy metal?
Durability? Cable rather than rope?

However, the handle is in a really inconvenient location for use in making rope as in the video.
 
I'm not sure it's even a tool. My first thought was a decorative finale where the bottom portion would be embedded in concrete but I don't know, never seen one like it.
 
Jim Becker":1bzakzu9 said:
john2189":1bzakzu9 said:
Gary Dotson":1bzakzu9 said:
I think the rope making tool has merit.

I agree, but why would they have made it out of heavy metal?
Durability? Cable rather than rope?

However, the handle is in a really inconvenient location for use in making rope as in the video.

I found a couple of videos that use a piece like that and none of them used the handle on the side
 
Urbish":2in22o4c said:
I wonder if it is a tamper for sand casting in a foundry.
I like this idea.... Looked it over some this evening and it's larger than I thought and maybe closer to 4 inches in diameter. Owner picked it up at a yard sale for $1.oo and he thinks it was used to crush blocks of ice. Blades were once sharp on the end but not along the sides.
 
Back
Top