I thought that my previous post covered the subject for home and shop purposes but subsequent questions and comments show that not to be the case. A T8 lamp produces more light (lumens) per watt of input power than does a T12. The end result is that to achieve a certain specified lighting level, using a T8 system achieves that level using fewer watts of power. But it typically requires more T8 fixtures and lamps than is required for the same lighting level with T12. Converting a specific number of existing T12 fixtures to T8 will reduce both the light output and the wattage usage, with wattage dropping more than does the light output. As far as I know, all T8 ballasts are electronic, as are all the presently manufactured T12 ballasts. The ballast uses power and the tubes use power. The older magnetic ballasts, still in use by the millions, use more power than do the electronic ballasts. To compare overall luminous efficiency (lm/W), a T12 with magnetic ballast is about 60% compared to a T8 electronic which may be 80-100%. A T12 with electronic ballast would be more than 60% but less than 80%.