Source for 8 ga. female spade terminal (3/8" or 10 mm)

[CharlieK]

it's in the USA

 

[Peter Person]

https://windandsolar.com/3-8-inch-spade-terminals/

 

[birddog]

How about an 8 gauge butt connector split and flattened, then ground down to 3/8 ths.

Edit: Sorry, I forgot you were looking for female terminals.

 

[kully560]

sorry my bad I read to quick

 

[phill_mi]

If I understand the issue I think you are looking for a F2 to F1 adapter sold at most Battery outlets
https://www.amazon.com/Terminal-Ada...hvlocphy=&hvtargid=pla-4583795267645234&psc=1

 

[Gary Dotson]

Bob, I thought I might have some of those but I couldn’t locate them.

 

[69ranger]

Hey Bob,

We used to get a lot of things from Digi-Key when I worked in the electronics field.
They have a lot of parts, and might have what you need.

Good luck, and I am interested in the out come of your electric steering project. This sounds like a great way to improve and old hard to steer tractor. My M could sure use some help..

 

[Bob McCarty]

Thanks for all the leads. I found some 3/8" for 10-12 ga. wire, but will stop by Batteries Plus and a trailer store to see if I can find 8 ga. local. I'd rather not pay the shipping for two terminals if I can find them here.