I was going to post a picture of this but couldn't figure out how to get it transfered from my phone to the computer. shrink wrap for those who aren't familiar with it, is that saran wrap like stuff that they wrap around stuff on pallets to hold it all together for shipping. If you go into Home Depot and look up into there overhead storage shelves you will see it there. In several layers it is very strong but when torn off and thrown on the ground it is very light and wispy. And when you get rotating equipment especially with cooling fans such a cars, trucks tractors and fork lifts it snatches it right up and spins around the shaft tightly. Working as a mechanic in a lumber yard I've seen it destroy all types of bearings and seals including Alternators, water pumps, Idler pulleys, cooling fan bearings, and front main seals. This time it was a fork lift front main seal. In order to replace the seal I had to remove the vibration damper and front cover which in turn required me to remove the oil pan. After removing the oil pan I found shrink wrap had passed threw the front main seal shredded into pieces and had almost completely closed off the suction screen of the oil pump. The moral of this story is if you see this stuff on the ground at your work or at your home pick it up and get it into the trash. If see it on the road, in a parking lot, lawn or field don't run over it with your car truck lawn mower or tractor avoid it like the plague. also similarly hazardous is those light plastic shopping bags you see blowing around on a windy day.