Should I buy a 9N?

get something with standard live pto and 3 pt, also power steering,---ya not really needed but sure is nice in close quarters and backing up! 340, 2444, 504, etc. are nice sized and will do everything you want and more. Even loaders if your into tractor loaders which I am not !-- skidsteers , crawlers or Michigan 4x4's are the only thing that works for me here!
 
I think I’m going to pass on that one. Just because I’m not sure what I want for my next tractor.
Probably a good call. I’ve had a few 8N’s and to me it’s aggravating that the PTO has to be in for the lift to work. At bare minimum I’d go for a Jubilee/NAA if I wanted an old ford. Some of the later 660/661/860/860 were pretty good tractors. I liked my little Fergie 35 Deluxe more than any old ford I’ve had.
 
Probably a good call. I’ve had a few 8N’s and to me it’s aggravating that the PTO has to be in for the lift to work. At bare minimum I’d go for a Jubilee/NAA if I wanted an old ford. Some of the later 660/661/860/860 were pretty good tractors. I liked my little Fergie 35 Deluxe more than any old ford I’ve had.
A 9N is ok if you just want to fiddle around a bit and maybe restore it to show. Other than the 3-point hitch, they're not very practical compared to many others. I'd say they're best for nostalgia if you just love Fords. The later 600 and 800 series Fords were where things really began to get handy and practical, with good gearing ratios, live hydraulics, available live PTO, more power, and a fixed drawbar. The 9N also has terrible brakes, right out of the factory, difficult to use correctly.

Having said that, the 9N introduced the USA to the 3-point hitch utility tractor paradigm, which almost every other manufacturer mimicked within the next 10-20 years. The 8N is a significant improvement over the 9N.

But just to have an inexpensive, simple, stylish old antique tractor, the 9N can fill a niche.
 
A 9N is ok if you just want to fiddle around a bit and maybe restore it to show. Other than the 3-point hitch, they're not very practical compared to many others. I'd say they're best for nostalgia if you just love Fords. The later 600 and 800 series Fords were where things really began to get handy and practical, with good gearing ratios, live hydraulics, available live PTO, more power, and a fixed drawbar. The 9N also has terrible brakes, right out of the factory, difficult to use correctly.

Having said that, the 9N introduced the USA to the 3-point hitch utility tractor paradigm, which almost every other manufacturer mimicked within the next 10-20 years. The 8N is a significant improvement over the 9N.

But just to have an inexpensive, simple, stylish old antique tractor, the 9N can fill a niche.
There are a lot of 9Ns still out there working, plowing, grading, mowing, etc. As for restoring, an original 1939 9N would be worth it, but for the most part, they're made to work. Unfortunately, a lot of 2Ns get mis-identified as 9Ns, since the serial numbers on both models start with "9N", and the fact that except for a few subtle differences, they're almost identical. And yes, the live hydraulics introduced with the 1953 Golden Jubilee was a game changer. As for the live PTO option, not too many Jubilees and NAAs are out there with that option.
 
Back
Top