Should I buy a 9N?

Cubfarmall

New member
Hi all,
I have a buddy who wants to sell me his 9n. The problem is it has crack in the water jacket right below the head. It’s been welded but it leaks a little. I don’t think it leaks coolant in the oil. It’s a good running tractor. I guess the question is should I buy it of not? He said name your price for the tractor and he would sell it to me.
 
For me, the downside is the pto is not independent of the transmission and only runs when the clutch is engaged. Successor to the 2N and before the 8N. Power about like an A or SA. If you've never run one it's a learning curve to keep the pto from pushing the tractor when the clutch is depressed--translation: You will have to learn how to not run over things when using the pto! :LOL: JMHO Stan
 
9N and 2N were the other way around. Model number is the last digit of the year each came along: 9N - '39. 2N - '42, 8N - '48.
Jim's got it right, I got confused. Somewhere I think I saw some info that stated that the 2N (1942) was designed and built to address the limiting of raw materials that was brought on by WW2. Stan
 
A lot of 2Ns get misidentified as a 9N, due to the serial numbers on both models start with "9N". 2Ns will have holes in the lower front portion of the doglegs to gain access to the lower grille bolts, 9Ns did not have the access holes. In mid 1944, Ford changed the radius arms from I-beam shaped to oval shaped, so early 2Ns had the I-beam shaped arms, just like the 9Ns had.

The transmission run PTO was pretty common and most manufacturers did not come out with a "live" PTO till a lot later. Ford offered an optional live PTO starting with the 1953 Jubilee and starting with the 600 and 800 series, it was standard on some of those models, i.e. 660, 860, 661, etc. Ferguson didn't offer a live PTO until around the time Ford did.

The only drawback to the 9N, 2N and 8Ns was the non-live hydraulic system, which was fixed when Ford brought out the Jubilee in 1953.

A little id history of the Ford N-series.https://fordtractorcollectors.com/identify-my-tractor/tractor-id-history/?fbclid=IwAR3mfRzeML8HtenEQrKPbxlkPkWShCCop-AnhNaPSRFV8iwNPuIJLRr5zWE

A lot of parts, Steiners, Just8ns, Dennis Carpenter, Yesterday Tractors and yes, Amazon.



 
Lots of good information. The main thing I would use it for is brush hogging and maybe a 2 bottom plow. I do like the idea of the tractor will need an engine. I don’t know if I want to mess with putting an engine in it.
 
People have been using N-series tractors every since 1939. They are one of the most versatile tractors made. I know I have heard that a Farmall Cub is one of the most useless tractors made, but we all know that isn't true.

A 1944 2N working:


 
cub will out work Ford any day of the week! PLUS more uses because of the way its made. AND you can get to the dist. without taking the motor out!!! LOL!!! Everybody has their opinions about them. Got a 53 golden jube. here,--- junk when it was given to me still junk! ZERO usable gears in it, not even first gear!
 
As you can see, opinions vary, kinda like asking about motor oil! They have been popular with many people over the years and have a good availability of parts. Like anything vintage, there's + and - and you need to see how it shakes out for you.
Sounds like the potential engine problem and repair has answered your question unless there's more pluses on your list.

I wasn't looking for, or even had a need for a 8N tractor. My dear friend next door passed away unexpectedly and I was helping his widow liquidate his barn and tractor stuff. He had a decent '51 8N and I couldn't let it go, so I bought it. My love for tractors came from spending time in the summer on my Uncle's farm. He had an 8N, so I guess I had a double sentimental attachment to it.

Best of luck, whatever you decide to do,
David
 
I have an 8N and it runs real nice. Using it to mow with a finishing mower is great although the low gear is too fast and I imagine using a land plow or towing a harrow would be good. But for anything like using a blade, a rear bucket or a boom...forget it. The hydraulics are frustrating because it has to be in neutral or be in gear to work...like the JD B....frustrating as heck. Imagine a 2N or a 9N would have the same plusses and minuses
 
To each his own, I guess. I remember when I got my first Cub, I was told if "you just want a tractor to show, buy a Cub. If you want a tractor to do work, buy a Ford". Having own and used both and I really have no complaints on either.
 
I guess the biggest issue is the leak for me. I think have a tractor with a 3 point would be fun to play with.

I guess the question would be how well does the Rotary mower for the cub work?

That’s really the big thing for me is the 9N can run a brush hog a few times a year.
 
A 9N can run a brush hog. Remember the pto on the tractor is 1 1/8, while most mowers will be 1 3/8. You can buy an adapter or better yet, an overrunning clutch that goes from 1 1/8 to 1 3/8. The overrunning clutch is a must to keep the mower from pushing the tractor. Tractor Supply and other farm stores will have them.

 
A 9N can run a brush hog. Remember the pto on the tractor is 1 1/8, while most mowers will be 1 3/8. You can buy an adapter or better yet, an overrunning clutch that goes from 1 1/8 to 1 3/8. The overrunning clutch is a must to keep the mower from pushing the tractor. Tractor Supply and other farm stores will have them.

Great video! What gear are you mowing in?
 
Back
Top