Rescue Cub in Brazil

[stephanev8brazil]

Ready to paint.

 

[Stanton]

The head gasket looks wonderful! Will you need to spray a copper coating over it as well, or just use it dry when installing?

 

[stephanev8brazil]

Hi. Stanton.

The head gasket was handy made by a very talented Lady. In Brazil this spray is does not exist. I will installing only the gasket.

 

[Gary Dotson]

Just know that solid copper head gaskets are known for seeping. Would be good to use a sealant on it. Years ago, we would spray them with aluminum paint. Copper coat spray cane along and changed that.

 

[stephanev8brazil]

Just know that solid copper head gaskets are known for seeping. Would be good to use a sealant on it. Years ago, we would spray them with aluminum paint. Copper coat spray cane along and changed that.

Hi Gary. I will a buy this copper coat spray to use in my engine.

You and Stanton speaking well about this sealant.

thank you for information.

 

[Glen]

Hi,
They have said on here to spray the head gasket with the sealer just as you are going to put the head on the engine, so the sealer is wet as you put the head on.
The head bolts need sealer too, but not the copper spray.

Below is info I wrote at a post about putting the head on a Cub engine, and showing the sealers. My post is part way down the page.

viewtopic.php?f=1&t=102173&p=807860

The Cub service manual shows the torque sequence for the head bolts.
Below is the page.

http://www.farmallcub.info/manuals/gss- ... 001-14.jpg

 

[stephanev8brazil]

Hi,
They have said on here to spray the head gasket with the sealer just as you are going to put the head on the engine, so the sealer is wet as you put the head on.
The head bolts need sealer too, but not the copper spray.

Below is info I wrote at a post about putting the head on a Cub engine, and showing the sealers. My post is part way down the page.

http://farmallcub.com/phpBB2/viewtopic. ... 3&p=807860

The Cub service manual shows the torque sequence for the head bolts.
Below is the page.

http://www.farmallcub.info/manuals/gss- ... 001-14.jpg

Thanks Glen

 

[stephanev8brazil]

******** Happy New Year to Everbody of famallcub.com Peace and health are my votes. **************

 

[Don McCombs]

Happy New Year, Stephane.

 

[Jeff Silvey]

Happy New Year, Stephane!!

 

[Tom Clark]

Happy New Year, Stephane!

 

[Gary Dotson]

Happy New Year, Stephane!

 

[Stanton]

Happy New Year to you, Stephane! Thanks for being part of the forum! We’ve enjoyed following your work on your Cub.

Here’s to getting it running in 2022!

 

[Pap]

Happy New Year to you Stephane !!!
We are looking forward to seeing your Cub running..

 

[Clemsonfor]

Cool picture. May God Bless us again in 2022.

 

[Kilgore1948]

I have seen several cubs in my life but never one with no grill. I’m wondering why that one had a solid nose?

 

[Don McCombs]

I don't think that Stephane's Cub had a solid grille. I think it just appears that way in the video. Perhaps he will clear it up for us.

 

[stephanev8brazil]

I have seen several cubs in my life but never one with no grill. I’m wondering why that one had a solid nose?

Hello Kilgore. How Are you?

My cub has a grill. What video or pic do you talk?

 

[stephanev8brazil]

Hello Friends.

Today I am Happy. My Cub parts and tools arrive from USA. I will post pics as soon !

 

[stephanev8brazil]

Hello.