Model 54 grader blade parts

[vetal80]

I recently acquired a model 54 grader blade that has almost all its original parts. The gentleman that I got it from had some cobbled together parts to use it as a grader blade. I would like to be able to use it on the front of the tractor. The parts that are missing are the Bellcrank Extension, the Lifting Lever, the Lifting Rod, and the blocks that go in the steering housing. I can make all the parts, but was wondering if anyone had or can get the dimensions for the Bellcrank Extension and the Lifting Lever.

I will add photos to what I have here shortly.

Thanks for any help.

 

[vetal80]

Here are the photos of the grader blade and accompanying parts.

 

[vetal80]

Here is a photo of the Cub it is going on.

 

[Tractor Dave]

Stan helped me out with some dimensions if you look at my post. Just click this thread I attached and read through.

T

Thread 'Cub blade bell crank extension'

Mar 3, 2025

I pulled the blade out of the pile of stuff I bought last fall and I don’t have all the brackets to mount it. I plan on making what I can, but was wondering if anyone has any better pictures or dimensions of this bell crank extension. This picture is from TM Tractors, should be easy enough to make but if anyone has measurements handy, would make it a little easier on me. Otherwise I’ll just wing it
Found one online but they want $100, Yikes.

• Tractor Dave
• Replies: 25
• Forum: Farmall Cub

 

[staninlowerAL]

Welcome to the forum. You should be able to find the info that you're looking for on the forum. Look under the Resources link at the top of this page. Also look at TM Tractor website for pictures that show the different versions that may be helpful. Stan

 

[vetal80]

Stan helped me out with some dimensions if you look at my post. Just click this thread I attached and read through.

T

Thread 'Cub blade bell crank extension'

Mar 3, 2025

I pulled the blade out of the pile of stuff I bought last fall and I don’t have all the brackets to mount it. I plan on making what I can, but was wondering if anyone has any better pictures or dimensions of this bell crank extension. This picture is from TM Tractors, should be easy enough to make but if anyone has measurements handy, would make it a little easier on me. Otherwise I’ll just wing it
Found one online but they want $100, Yikes.

• Tractor Dave
• Replies: 25
• Forum: Farmall Cub

Thank you very much, this helps alot.

 

[Don McCombs]

These may be of some use…

 

[vetal80]

These may be of some use…

Thank you for the info

 

[Cubfriend]

Stan helped me out with some dimensions if you look at my post. Just click this thread I attached and read through.

T

Thread 'Cub blade bell crank extension'

Mar 3, 2025

I pulled the blade out of the pile of stuff I bought last fall and I don’t have all the brackets to mount it. I plan on making what I can, but was wondering if anyone has any better pictures or dimensions of this bell crank extension. This picture is from TM Tractors, should be easy enough to make but if anyone has measurements handy, would make it a little easier on me. Otherwise I’ll just wing it
Found one online but they want $100, Yikes.

• Tractor Dave
• Replies: 25
• Forum: Farmall Cub

Have you tried JP Tractor Salvage in Fredericktown, MO?

 

[vetal80]

Have you tried JP Tractor Salvage in Fredericktown, MO?

Thank you for the info. I haven't tried JP Tractor Salvage yet. I live in Oregon and I can make the parts cheaper than buying and shipping parts out here.

 

[Cubfriend]

Thank you for the info. I haven't tried JP Tractor Salvage yet. I live in Oregon and I can make the parts cheaper than buying and shipping parts out here.

10-4, I’m sure you will do just fine. Happy building.

 

[vetal80]

Finally got the blade mounted. Thank you to everyone that supplied information on the parts that I was missing. All I need to do now is make or aquire the lifting arm and linkage to mount to the front.

 

[staninlowerAL]

Lookin' good!! Stan