Keyed Starter Switch
- Thread starter Kegman
- Start date
Gary Dotson
501 Club
With a keyed switch, you do have it wired with a solenoid, right? I have no brand name for the switches I've used, I pick them up at the flea market, very generic. I've had no problems with starter switches.
gitractorman
501 Club
I used a switch from Brillman (site sponsor). I needed one with a magento kill, so it has a contact for the magneto that goes to ground when the key is turned off, but they literally have dozens of different types of key switches. Here is my setup:
I added a starter solenoid behind the dash where the push button used to be. I don't have a picture from the back, but below is the picture of the plate I made to go in the starter button hole. The back of the plate has studs on it for a 12v solenoid to bolt to.
View attachment 1
I added a starter solenoid behind the dash where the push button used to be. I don't have a picture from the back, but below is the picture of the plate I made to go in the starter button hole. The back of the plate has studs on it for a 12v solenoid to bolt to.
View attachment 1
