Here's an off-the-wall question that I hope someone can answer. I'm running a cable from an internet server to a downstairs computer. I'm using Cat-5e cable to run from the router, thru the wall down into an outlet box (#2) downstairs in the house. The cable terminates in an ethernet socket, the type (RJ-45) where you push the 8 wires down into channels on the back of the socket.
I'd also like to have another ethernet outlet (#3) in an adjoining room where I can temporarily plug in laptop when I'm sitting next to the wood burning fireplace. A couple years ago when I had the wall open to install library cabinets, I had run another Cat-5e cable from that same downstairs outlet box (#2), through the wall and ceiling to a third room's own ethernet outlet (#3). I'd like to now connect that cable in the #2 box. I tried doing so by "punching down" the 8 wires of that cable on top of the ones already inserted into the RJ-45 plug, but the #3 outlet is dead. I've done this successfully with phone lines, but apparently it doesn't work with ethernet.
Can anyone give me a solution? Basically I want to daisy-chain from one room to the next without having to make two home runs back to the router.
I'd also like to have another ethernet outlet (#3) in an adjoining room where I can temporarily plug in laptop when I'm sitting next to the wood burning fireplace. A couple years ago when I had the wall open to install library cabinets, I had run another Cat-5e cable from that same downstairs outlet box (#2), through the wall and ceiling to a third room's own ethernet outlet (#3). I'd like to now connect that cable in the #2 box. I tried doing so by "punching down" the 8 wires of that cable on top of the ones already inserted into the RJ-45 plug, but the #3 outlet is dead. I've done this successfully with phone lines, but apparently it doesn't work with ethernet.
Can anyone give me a solution? Basically I want to daisy-chain from one room to the next without having to make two home runs back to the router.