Irrigation pipe repairs

ebax

Well-known member
I made a major mistake when rototilling an area in our garden. I was going for the last pass and took a shortcut, and I snagged a 2" hose that goes to an irrigation hand line. I forgot that the rototiller tines barely clear the ground on the Cub Cadet and I pulled the hose several feet before I realized what was happening. Big oops! Water was gushing, so I jumped off the Cadet and shut off the water supply. I had pulled the aluminum irrigation pipes several feet, which is no problem. Fortunately the tiller was not rotating when I did this stunt and the 2" hose is ok. However, I did snap off a 2" main line valve and broke the riser. :evil: Once the water drained away I dug the pipe out to see what other damage I'd done. My worst fears were confirmed: I had cracked the T fitting and broken the main 2" line. :censored: I went through my spare PVC pipe parts and fittings and discovered I had to make a quick trip to the farm supply store in town. By the time I got home there wasn't enough time left to repair the pipe before I had to leave for work. I left the irrigation water shut off overnight and started on the project the next morning. All went well, except at the end I realized I had cut about 1 inch too much off the PVC main line. :censored: Once more there wasn't enough time to fix my error before I had to leave for work, so I just left it with a slight leak so my wife could water the new grass we planted a few days ago. This morning I spliced in an extra bit of PVC pipe and all is well. PVC is a lot more forgiving than steel pipe and is SO much easier to work with. I work in ammonia refrigeration in a food processing plant and all of our piping is in very heavy duty metal pipe, so I appreciate the ease of PVC. I guess the moral of the story is don't take shortcuts with tractors and pay attention to your surroundings. It's really easy to snag a pipe, run over a riser with a Cub Cadet or slice off a riser with a Cub and a 22 sickle mower. Guess how I learned that?
 
Yup, that's about all you can do. My wife said do as I say not as I do. She was the last one to tear out a pipe with a tractor and I told her to disconnect the hose before driving over it. Now we're even. In fact, she's probably one up.

Ed
 
Glad you could correct the damage with minimal inconvienience. Funny how "simple" repairs always seem to mushroom. :roll:
 
Back
Top