I promised some pics and I finally got around to loading em up. Pictures aren't going to be the best, cause the available room to take pics is somewhat cramped and the angles just are not conducive to quality pics, but hopefully one can get the gist of what the pics are trying to show.
Here is a pic of the front of my Scotty DB II 70,000 BTU Wood Furnace.
Against the wall you can see the 5" Make Up Vent that is used to provide cold crisp fresh air to my firebox in the winter. Without a makeup vent such as this, the fire will not burn as well, as it is trying to draw air from inside the house. It is difficult and the interior air is warm and tends not to have as much oxygen to fuel the fire. The makeup vent forestalls this problem. Since we installed the makeup vent, our heating costs have fallen drastically.. even though our cost are already dirt cheap. The next pic below is a frontal shot of the Scotty and the Electric Backup furnace. The two furnaces work in concert.. the electric furnace provides the cold air supply plenum and blowers. The wood furnace has the hot air plenum which is plumbed into the forced air ductwork.
The following pics are of my Wood Room and Kindling Box. Now the wood room is 12x14x10 foot high. This provides enough room for 10.5 cords of wood. In this case a long cord is the actual 16" x 48" x 144" which equals 48"x48"x96" or 128 cubic feet. My wood box is exactly 4 foot. This will account for 1.0 cords of wood as it is 48x48x96 inches high inside. So with my wood box and piled wood, accounting for the last 2 square foot of floor space which I very seldom fill up, I can put exactly 9 cords of 16" and 1 cord of kindling in my wood room for a total of 10 cords. If I need more, I can pile another foot on top of my existing 8 foot and achieve probably 2 more cords total.
Kindling Box
The kindling box is usually filled with mill ends and other small pieces from my wood shop, or as in this year's case.. off cuts from the pole barn project. Waste not, want not :!: :idea: :wink: :lol:
The bottom of the window is just above the top of the insulated stud wall. The stud wall is exactly 8 foot high. As you can see, there is lots of room for wood.