The Buying a New Chainsaw by BigBill thread, is what has prompted this post. It originally was going to be just a reply, but as usual, I went off on a tangent, and this is what resulted. I do hope this helps some..
Much of this comes from many generations of family both on my side and Emilie's side. We have pretty much always heated with wood except for my Mom and Dad, who became somewhat citified and heated with Natural Gas. Grandpa and Grandma always heated with wood. So, this post consolidates experience I have gained from heating homes with wood from Northern Ontario to New Brunswick in some of the coldest parts of the continent. Yes, there was wood heat even in Inuvik but not in Alert...
So here goes nothing:
For those of us lucky enough to own a wood lot, heating our homes is not very costly at all. They are forecasting a return to yesteryear here with a very cold, and they say frigid winter with temps averaging -40C which is about -40F. That is the average. I usually stock 9 cords of mixed soft and hardwood from fir, spruce, pine through poplar, wire birch, white birch, golden birch, various species of maple and some beech when we can lay our hands on it. I will also burn much of my slash from willow to alder and other bushy stuff if the stock is large enough. I normally go through 4 to 5 cords per winter heating 36,000 cubic feet of house. Yes really... ask anyone who has seen my basement. You can play basket ball almost there the bottom of the beam is 10 foot neet and the joists are 2x12... so 11 foot of basement.
It costs me around $100.00 or so per year, that figures in the fuel, chains etc., for the saw, gas for the saw table and gas for Ellie or Granny or both. Probably would include the electricity for the blowers as well. So yes.. heating with wood is very economical and contrary to some of these so-called militant environmentalists who say any CO2 in the atmoshere must be penalized with a Carbon Tax. They fail to realize that trees need CO2 to breathe and produce the O2 waste gas that WE need to breathe.... :big give up:
Even here, wood is getting to be around $185.00/per cord round or $200.00+ split. That is for hardwood only. So having your own wood lot or access to a wood lot that you can maintain and utilize the thinnings is a great savings.
Here is another point. Burning mono-species or mon-types is BAD for a chimney. It doesn't allow for hot or normal fires but usually just allows medium or very slow fires. Hotter fires are used to ensure that there is no creosote buildup in the flue. Too many idling fires actually contributes to a huge chimney/flue fire because of semi warm temps that continue to cool as they rise up the chimney and then deposit creosote in clumps at various heights in the chimney. This is a catastrophe waiting to happen. Don't ask why I know this
:roll:
Because of this and the amount of chimney fires we experienced the first oh 12 years or so that we had the house, I have learned that:
Oh a couple of other tips.
Wheeww.. am I done :?: :?:
Much of this comes from many generations of family both on my side and Emilie's side. We have pretty much always heated with wood except for my Mom and Dad, who became somewhat citified and heated with Natural Gas. Grandpa and Grandma always heated with wood. So, this post consolidates experience I have gained from heating homes with wood from Northern Ontario to New Brunswick in some of the coldest parts of the continent. Yes, there was wood heat even in Inuvik but not in Alert...
So here goes nothing:
For those of us lucky enough to own a wood lot, heating our homes is not very costly at all. They are forecasting a return to yesteryear here with a very cold, and they say frigid winter with temps averaging -40C which is about -40F. That is the average. I usually stock 9 cords of mixed soft and hardwood from fir, spruce, pine through poplar, wire birch, white birch, golden birch, various species of maple and some beech when we can lay our hands on it. I will also burn much of my slash from willow to alder and other bushy stuff if the stock is large enough. I normally go through 4 to 5 cords per winter heating 36,000 cubic feet of house. Yes really... ask anyone who has seen my basement. You can play basket ball almost there the bottom of the beam is 10 foot neet and the joists are 2x12... so 11 foot of basement.
It costs me around $100.00 or so per year, that figures in the fuel, chains etc., for the saw, gas for the saw table and gas for Ellie or Granny or both. Probably would include the electricity for the blowers as well. So yes.. heating with wood is very economical and contrary to some of these so-called militant environmentalists who say any CO2 in the atmoshere must be penalized with a Carbon Tax. They fail to realize that trees need CO2 to breathe and produce the O2 waste gas that WE need to breathe.... :big give up:
Even here, wood is getting to be around $185.00/per cord round or $200.00+ split. That is for hardwood only. So having your own wood lot or access to a wood lot that you can maintain and utilize the thinnings is a great savings.
Here is another point. Burning mono-species or mon-types is BAD for a chimney. It doesn't allow for hot or normal fires but usually just allows medium or very slow fires. Hotter fires are used to ensure that there is no creosote buildup in the flue. Too many idling fires actually contributes to a huge chimney/flue fire because of semi warm temps that continue to cool as they rise up the chimney and then deposit creosote in clumps at various heights in the chimney. This is a catastrophe waiting to happen. Don't ask why I know this
Because of this and the amount of chimney fires we experienced the first oh 12 years or so that we had the house, I have learned that:
- A Sentinel, GSW 2000 or other 2000 degree double walled stainless steel chimney is probably the safest chimney for new construction or even a retro-fit
- Any of these double walled chimneys that are external, must be covered with a chimney surround to equalize the inner flue temperatures to prevent creosote buildup
- A hot fire in the morning (fueled by softwood or poplar) plus moderate fires during the day with mixed woods and a nice overnight fire with hardwood, will go a long way to decreasing the risk of chimney fires from creosote buildup
- Regular cleaning either by self or from a qualified and licensed chimney sweeping company is a must
- Burning a mix of firewood is also a must
- Whatever you choose to burn, ensure that it has properly seasoned.
- Whichever method of heating you choose, be it furnace based forced air, radiant heat, pellet/wood stoves or fireplaces, always install and operate according to local state/provincial, municipal and fire marshall regulations.
- Cut and let air dry one full season in 4 foot lengths. Minimum 3 months. Ideally cutting should be done between January and March.
- Cut to stove, furnace, fireplace length (say 16") beginning of June and July - here is where your Cub comes in -- get a Brookfield Cub Sawyer saw or similar or even an old saw table such as the one I have, (pics to follow) . Power the saw with your Cub. Not only will you get a lot of enjoyment, it is also more economical than say an 8 or 10 hp B&S as a Cub will run twice as long on the same amount of gas as the B&S or Tecumseh. Yup.. I know that based on my years of cutting wood using the B&S. Cut safely.. do not take your mind off of the job at hand.
- Split as required and then let dry at least one month.
- Then stack your firewood indoors. (we have a basement wood room that is 12x14x10 foot. This allows 8 foot piles. We can easily stack 8 rows 12 foot long which makes 8 cords. The last 2 rows are 8 foot long which allows about 1.6 cords. We also have a kindling bin that is 4x4x8 foot high or 1 cord of kindling. So we actually have 10 cords. I can increase this to 12 or 13 if absolutley necessary by going another foot higher on the piles.
- If you have no indoor storage, pile your firewood on used shipping pallets, cover the firewood to keep off the snow and rain. You can do this by utilizing tarps, snowmobile shipping container sides (they are covered in Tyvek/TyPar - housewwrap), or even those nice portable car garages -- just anchor them well.
Oh a couple of other tips.
- If you have never used a chainsaw. Learn from the dealer. They will teach you how to properly use one and to care for it as well.
- Always use safety pants -- these usually have some kind of chainmail (made from composites now) to prevent you accidentally cutting your leg off or burning a hole in your leg from the muffler. Again NO YOU CANNOT ASK!

- When working alone, keep you mind on what you are doing. You can get hurt real fast if you do not pay attention.
- Just have a lot of fun. Providing your own heat if you can is a very satisfying excercise. When done correctly it is not a long term job, each section only takes a few hours or a couple of days depending on your needs and schedule. This year we cut and split over 20 cords of wood.. about 14 for me and 8 or so for my Father-in-law in 3 days. We hauled most of it in and stacked it inside and outside in less than 1.5 days. Still have a bit left to do. The longest part is cutting the standing timber in the woodlot.
- Oh, almost forgot.. if you are near a mill, some mills will sell you slabbing and mill ends very cheap. By the cord or by the bucket as in loader bucket. This is also a good way to get wood for heating.
Wheeww.. am I done :?: :?: