Gas cans

To regulate Commerce with foreign Nations, and among the several States, and with the Indian Tribes;

(OK Jim, you had to know somebody would look it up and check to see you weren't making it up!)

So If I buy a gas can made in MO (or Bus Driver buys one made in NC) and not by an Indian Tribe; congress shouldn't be involved, right?. :D :lol:
 
Scrivet":3023nbln said:
So If I buy a gas can made in MO (or Bus Driver buys one made in NC) and not by an Indian Tribe; congress shouldn't be involved, right?. :D :lol:
If you could find somebody that makes cans in MO with no plans to sell them in any other state, they might be willing to ignore congress. However, I probably did quote the wrong clause. The cans are probably regulated by the EPA under the Clean Air Act. I think that act is covered by clause 1 (general welfare) of the same article/section
"The Congress shall have Power To lay and collect Taxes, Duties, Imposts and Excises, to pay the Debts and provide for the common Defence and general Welfare of the United States; but all Duties, Imposts and Excises shall be uniform throughout the United States;"
 
So a cheapo filler neck costs half what a 'No Spill' brand container costs. Not a bargain any way you look at it. Also consider that older materials don't play well with ethanol, so be careful.

I can tell you that the odds of me not getting ALL the fuel in a mower tank is pretty high and I do pay attention, it just seems to happen. That is never a problem with the No Spill one. The best part is that it is the easiest and most convenient fuel container I have ever used. No spilled fuel, no poking around for that pesky little disc (that helps keep water vapors out of your ethanol), no crazy buttons to press while you pull the lever. It's ingenious and it works.

If I want to get frustrated, I can try to get 5 gallons of biodiesel in my truck with that dang yeller CARB 5 gallon container without getting any on the paint.... it doesn't happen....EVER.

Even 'jerry' cans are required to CARB/EPA compliant these days. One advantage of those rules is it limits evaporation and also keeps moist air out.

http://www.nospill.com/Why-NO-SPILL-.html
 
Its my understanding that if you live in Virginia, outside the limits of what is considered Northern Va . You can still sell and use the old style cans and spouts legally if you can find them. I still have my old ones laying around. I imagine that the bureaucrats that wrote these regulations never had to lift a can full of fuel and place it into a piece of machinery .
 
I've bought two no spill tanks since this post began... one 5 gal for gas and (a few months later) a one 1 gallon can for gas/oil mix. After almost a year of use I give them a wholehearted recommendation.

~ Jim
 
One of the local stores had the No Spill cans when they first came out and I bought a small 1 1/2 gallon one for use with 2 cycle mix. I have had it for 7 or 8 years and am happy with it for its use, but no one locally stocks them now. I have used the Blitz cans and spouts for the small cans , but they are out of business now, and the new spouts you push in are a real pain to use with items such as Weedeaters. You need one hand to hold the weedeater from moving, one to hold the angle of the can right, and a 3rd hand to push it down to open the spout.
 
Yep, EJP.... I was using the Wedco last weekend when I was brushcutting and nozzle broke at a fold. I can get a nozzle for about $10 but someone forgot to replace the disc so I need more than the nozzle. I won't throw it out, but it will be replace by a No Spill!

Stihl dealers carry them. Amazon has them, shipping is free on orders more than $25. They get $16 for the 1 1/4 gallon one or $19 for the 2 1/2 gallon, why would I replace the spout???

http://www.amazon.com/No-Spill-1405-2-G ... m_sbs_lg_1
 
Back
Top