Hi,
Does anyone know how to contact cubguy, one of the members on here. I read a post he made in 2009 saying he was making wooden grass boards, and the metal rods for them, for the Cub 22 mowers. It says he hasn't visited here for 2 years. I know someone that wants one of the rods. I wrote cubguy, and he hasn't seen my message. Thanks.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Does anyone know cubguy
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 6179
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
-
- Team Cub
- Posts: 11885
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Does anyone know cubguy
I don't think he or his dad visit the Forum anymore. The rod is easy to fab, but does require the rod to be welded to the bar stock. If he wants to make one, I can measure one and PM you the dimensions.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- Team Cub
- Posts: 9539
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: Does anyone know cubguy
Another option might be tst (Tim Talleur). He has made some of the wooden grassboards and is an excellent metal fabricator. Send him a PM and he will be in touch promptly.
Bill
Bill
-
- Team Cub Mentor
- Posts: 4129
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
Re: Does anyone know cubguy
I just made a grass board and rod for a resto I'm doing. It's not a good pic but I'll try to get another.
-
- 10+ Years
- Posts: 595
- Joined: Mon Feb 03, 2003 2:01 am
- Zip Code: 48609
- Circle of Safety: Y
- Location: Mi, Saginaw
Re: Does anyone know cubguy
I have a grassboard made by Cubguy. Problem with it is that it is too nice to use. It is made for a mower that is on a show tractor. I have it hanging on the wall like a piece of art that it is. TedGlen wrote:Hi,
Does anyone know how to contact cubguy, one of the members on here. I read a post he made in 2009 saying he was making wooden grass boards, and the metal rods for them, for the Cub 22 mowers. It says he hasn't visited here for 2 years. I know someone that wants one of the rods. I wrote cubguy, and he hasn't seen my message. Thanks.
-
- 10+ Years
- Posts: 484
- Joined: Sun Aug 05, 2012 7:01 am
- Zip Code: 00000
- Tractors Owned: 1955 Cub Fast Hitch
sickle bar
land plow
harrows
snow plow
manure spreader
hayrake, rope pull
variety of cultivators
Wagner WM-1 bucket loader
rear carrier -- homemade - Location: Berkshire hills
Re: Does anyone know cubguy
I had one of those all metal -- all tractor -- grassboards. Not so good. But it had a rod and connector (if you have one of these mass market chunks-a-junk) that easily goes on to a wood grassboard. Not an exact or near-exact restoration job, but it works. Basically, a rod with a 90 deg. bend that's held by a clip that has a bolt hole. Bolt goes through the holder and the grassboard and clamps down on the rod. Need a photo? Can do.
-
- 10+ Years
- Posts: 6179
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Does anyone know cubguy
Hi,
Thanks for the replies, we're going to ask tst, Tim about it and see what he makes.
Thanks for the replies, we're going to ask tst, Tim about it and see what he makes.
-
- 10+ Years
- Posts: 2558
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Does anyone know cubguy
what happened to CubGuy and his dad??
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Who is online
Users browsing this forum: No registered users and 3 guests