This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
removing implements
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 46
- Joined: Wed Jun 30, 2004 9:09 am
- Location: nor cal
removing implements
trying to get the front cultivator unit off the tractor, all the bolts are out, but it does budge. sprayed PB blaster and hit with hammer. no go
-
- 10+ Years
- Posts: 1132
- Joined: Sun May 29, 2005 1:21 pm
- Zip Code: 04762
- Location: ME, New Sweden
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
Het Troweller. You say you have all the bolts removed. Are you saying the right cult half is froze onto the square stock that runs to the other left side. Or is the left side froze into the steering housing?
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- Cub Pro
- Posts: 2461
- Joined: Mon Feb 17, 2003 7:53 am
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo
Tryke
Rat Cub - Circle of Safety: Y
- Location: IN West Lafayette
-
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
And another thing you might want to check. Look at your two bolts that you removed from the casting. Are they the same length? There is a slight chance that one bolt broke off towards the very end , but still unscrewed, and is still holding the square stock in place. I've had a couple of these old bolts break off and needed drilled out and re-tapped. Hope this isn't the case for you. If this is the case, then listen to Nik's advice
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
- Posts: 5880
- Joined: Thu Jul 28, 2005 2:37 pm
- Zip Code: 44645
- eBay ID: kevinb2366
- Tractors Owned: 47 Cub 48 Cub 50 H
- Location: Marshallville Ohio
I LIKED KINELBOR'S REMARK.GET ANOTHER CUB!!!SPRAY DOWN WITH PENATRATING OIL LET IT SOAK!!!IT DON'T WORK RIGHT AWAY,WALK AWAY AND DO SOMETHING ELSE.GOOD LUCK!!!KETCHAM
47 CUB[Krusty] 49 CUB[Ollie] 50 H-- PLOWS DISCS MOWERS AND lots more stuff!!Life is to short -Have fun now cause ya ain't gonna be here long!!!!
-
- 10+ Years
- Posts: 46
- Joined: Wed Jun 30, 2004 9:09 am
- Location: nor cal
i just ANOTHER cub, but it is seized i think, with a whole lot of implements-loader, front blade, plow, sickle, cultivators, plow, disc plow, offset disc, spring tooth, rotary cultivator, broadcast seeder, chipper, and manure spreader. I want to check some of the new implements on my cub that runs, but i cant get the cultivator unit off. the square stock of cultivator is stuck everywhere, there aren't any set screws holding it together.
-
- Team Cub
- Posts: 17289
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- 10+ Years
- Posts: 46
- Joined: Wed Jun 30, 2004 9:09 am
- Location: nor cal
-
- 10+ Years
- Posts: 955
- Joined: Sun Aug 24, 2003 6:00 am
- Zip Code: 04071
- Tractors Owned: Cubless, but living vicariously through others
'61 Ford 641
Kubota BX 2370 - Location: ME Raymond
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
troweller wrote:so posting a picture is not as easy as i though, whats the easy way to post?
Here are some tips...
How To Do Neat Stuff in a Post. Once you got that, check out FarmallCub | Cubfest Photo Gallery and How to post photo links in FarmallCub.com Forum.
Then poof you have a pic in a post
Why does that sound like some old axiom Lately, a lot of what I say seems to evoke those thoughts... must be old age..
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Removing the TC without removing the hood Attachment(s)
by Bill Hudson » Sun Oct 16, 2022 6:20 pm » in Farmall Cub - 7
- 317
-
by Bill Hudson
Mon Oct 17, 2022 11:43 am
-
-
- 16
- 1075
-
by Don McCombs
Mon Aug 21, 2023 4:15 pm
-
-
Do I have all of the right parts for my Cub implements? Attachment(s)
by Mrbill » Wed Nov 02, 2022 6:02 pm » in Farmall Cub - 8
- 388
-
by Mrbill
Tue Nov 08, 2022 7:39 pm
-
-
- 3
- 323
-
by Matt Kirsch
Thu Jan 26, 2023 11:44 am
-
- 13
- 562
-
by Electronrider
Fri Jun 10, 2022 6:32 am
Who is online
Users browsing this forum: No registered users and 4 guests