This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cultivator question?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 4
- Joined: Fri Mar 29, 2024 6:17 am
- Zip Code: 19973
Cultivator question?
Does anyone know what type of washer or backing plate is correct for attaching the sweeps to the shank? Is it a big square washer or an actual plate? Thanks for any help
-
- Team Cub
- Posts: 17317
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Cultivator question?
I take it you are asking about the spring trip or friction trip shanks with an open back side. The original was a washer, 15/32 id, 1-1/2 od, 11 gauge. That is close to 1/8 thick. It isn't a standard size you find in a hardware store. I have used 7/16 fender washers with moderate success. They are too big od and only about half the original thickness.
-
- Posts: 4
- Joined: Fri Mar 29, 2024 6:17 am
- Zip Code: 19973
Re: Cultivator question?
Yes, that’s exactly what I was talking about. Thanks for your help I appreciate that very much
-
- Posts: 7
- Joined: Thu Feb 29, 2024 8:29 pm
- Zip Code: 00000
- Tractors Owned: 1952 Massey Harris Pony
1953 Farmall Super A
1971 John Deere 820 Utility
1974 IH Cub Cadet 86
1998 John Deere 870 - Circle of Safety: Y
- Location: Eastern NC
Re: Cultivator question?
Agri Supply or other farm stores carry them. Even at the substantial thickness, they will bend.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 839
-
by Dbrigante1010
Thu Nov 16, 2023 12:36 pm
-
-
Super A cultivator parts and setup
by timtires » Mon Apr 03, 2023 10:46 am » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 1030
-
by customcutter
Fri Apr 14, 2023 9:11 am
-
-
-
Farmall 130 rear cultivator lift spring
by rsessoms » Sun Feb 06, 2022 4:30 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 1
- 289
-
by workinonit
Wed Mar 09, 2022 10:11 am
-
-
- 11
- 1300
-
by AL Farmall Boy
Mon Jan 08, 2024 10:43 pm
-
-
A60 Blade question
by ShawnAgne » Sun Jan 07, 2024 7:31 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 825
-
by Lt.Mike
Wed Jan 31, 2024 4:49 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 0 guests