Bell crank extension (boomerang)

[Nosparkplug]

I have looked on the Vine, Marketplace and eBay with no luck. Does anyone know of one, have an extra or know of someone who can make one? Any help would be appreciated. TIA. Charles

[Mike in Louisiana]

Did you check with JP Tractor salvage , a sponsor at the bottom fo the page?

[Don McCombs]

Don't just look at The Vine. Place a wanted ad.

[Nosparkplug]

Mike, I looked on their website but did not call them.

[staninlowerAL]

Here's a couple of pictures that may help ID what you are looking for:

[Nosparkplug]

Stan, No. 10 in the top photo is what I’m looking for. Thanks

[staninlowerAL]

Stan, No. 10 in the top photo is what I’m looking for. Thanks

Note that's for the 54A blade. It's likely someone may have a drawing with dimensions, maybe they will post a link or picture. I took a quick look at the pdf manuals folder for member drawings but did not see one. Good luck. Stan

[Don McCombs]

Cub-54A Bellcrank Extension.pdf

(119.65 KiB) Downloaded 134 times

[Nosparkplug]

Stan, which on is this?

[tst]

that is a model 54

[staninlowerAL]

TM Tractor (forum sponsor) has pictures of all 3 versions of the cub leveling and grading blade on their website if you are interested in determining what the differences are for them. Look for How to hook up implements then scroll down to Leveling and Grading Blade. Looks like Don McCombs posted a drawing by Jim Baker that might be what you need to make one. Stan

[Nosparkplug]

Thanks Stan.

[Nosparkplug]

Can the 54 be belly mounted?
Edit to add: a little more looking and I got my answers. Still thanks!

[Ky Cub]

Check your PM.

[Nosparkplug]

My Cub, no pm.