This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Bell Crank Extension
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 308
- Joined: Thu May 24, 2018 9:57 pm
- Zip Code: 22958
- Tractors Owned: 5 Cubs
1952 100
1960 460 Utility - Location: Central Va.
Bell Crank Extension
I'm looking to make a Bell Crank Extension for one of my tractors. I have a question about the thickness of part of it. The tab that is welded to the longer piece is 3/8" thick. However I need to verify that the 16" (14" after bending") piece is a 1/2" thick. Seems a bit thick to lift a 150# blade. (Or as I'm typing this I'm thinking it's for downward pressure in the grader position.) Second question, what is the out side dimension of the stand off. Drawing has I.D. of 5/8" but no O.D. . I may have to find a shop to bend steel. They'll want dimensions of every thing. Sketch attached. Thank you to John Puckett for sketch.
Walter
-
- 10+ Years
- Posts: 2499
- Joined: Sun Feb 17, 2008 2:38 am
- Zip Code: 07727
- Tractors Owned: 1 -'58 International Cub Lo-Boy
2 - '46 International A's
2 - '52 Farmall Cubs
1 - '53 Farmall Super A
1 - ‘41 Ford 9N with a ‘49 8N Engine
1 - ‘48 (5641) Allis Chalmers G - Location: Farmingdale NJ
Re: Bell Crank Extension
I have two of these I’ll go out tomorrow and take measurements
Quote by Gary Pickeral I like
"If it can cast a shadow, it can be restored"
"If it can cast a shadow, it can be restored"
-
- 5+ Years
- Posts: 308
- Joined: Thu May 24, 2018 9:57 pm
- Zip Code: 22958
- Tractors Owned: 5 Cubs
1952 100
1960 460 Utility - Location: Central Va.
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Bell Crank Extension
The "boomerang" style extension is 1/2" stock, so I would think this one would be also. Since it is only a spacer, the exact OD of the standoff is not super critical.
Photo courtesy TM Tractor Parts
Photo courtesy TM Tractor Parts
-
- 10+ Years
- Posts: 1124
- Joined: Sun Feb 02, 2003 6:51 pm
- Zip Code: 21228
- Tractors Owned: 1948 Farmall Cub
LT1045 Cub Cadet - Circle of Safety: Y
- Location: MD, Catonsville
Re: Bell Crank Extension
From measurement, main bar is 1/2” thick. Spacer OD is 1 1/4”. Not certain, but I think spacer is probably 1 1/4” mechanical tubing x 5/16” wall.
Bill VanHooser
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Bell crank extension (boomerang) Attachment(s)
by Nosparkplug » Tue Feb 28, 2023 8:08 am » in Farmall Cub - 18
- 604
-
by Roger G.
Wed Mar 08, 2023 11:28 pm
-
-
-
Cub Plow 54A boomerang bell crank extension Attachment(s)
by trcone » Sun Dec 26, 2021 12:47 pm » in Farmall Cub - 7
- 490
-
by Don McCombs
Tue Jan 04, 2022 4:09 pm
-
-
- 11
- 556
-
by Larry in WNY
Wed Jan 12, 2022 12:00 pm
-
-
Brookfield/Mott model, 20 Buzzsaw shaft extension
by Abrand357 » Mon Jul 31, 2023 2:04 pm » in Farmall Cub - 1
- 138
-
by v w
Tue Aug 01, 2023 7:50 am
-
-
-
Bellcrank Extension-Boomerang hole size questions Attachment(s)
by dgrapes59 » Tue Mar 07, 2023 1:10 pm » in Farmall Cub - 6
- 234
-
by Jim Becker
Tue Mar 07, 2023 10:52 pm
-
Who is online
Users browsing this forum: JNewton and 9 guests