https://www.facebook.com/Lockandlube/vi ... 404975133/
Found this ad on fb. Thought it was cool since it involved a cub. Hope the link works. If not, I’ll delete
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall Cub Being Lockednlubed
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 3428
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
-
- 10+ Years
- Posts: 277
- Joined: Mon Jun 06, 2011 6:46 pm
- Zip Code: 99109
- Tractors Owned: 1954 Farmall Cub
2013 NH Workmaster 40 - Circle of Safety: Y
- Location: Chewelah, WA
Re: Farmall Cub Being Lockednlubed
I’m a big fan of the LockNLube! I have it on my grease gun and wholeheartedly recommend it to anyone who has greasing to do. Sure makes the job easier and cleaner.
WaMoo - Dairy Farmer and U.S. Coast Guard (Retired)
Chewelah, WA
"I had rather be on my farm than be emperor of the world."
~George Washington
Chewelah, WA
"I had rather be on my farm than be emperor of the world."
~George Washington
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Farmall Cub Being Lockednlubed
I have thought about one, but it would require an extra grease gun, since I have a ZTR mower that has several fittings there is not enough room to get that on them.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 5+ Years
- Posts: 2018
- Joined: Tue May 16, 2017 9:25 am
- Zip Code: 63628
- Tractors Owned: '40 H
'44 B
'47 Cub
'49 C
54A Blade
42 Woods Mower
Henderson Loader
Cultivators
No. 8 Little Genius 2-12 Plow
IH Running Gear - Circle of Safety: Y
- Location: Bonne Terre, Mo
Re: Farmall Cub Being Lockednlubed
I was thinking the same thing as John, there may be some grease fittings that may not be accessible with the locknlube coupling on the end of the hose.
-
- 10+ Years
- Posts: 277
- Joined: Mon Jun 06, 2011 6:46 pm
- Zip Code: 99109
- Tractors Owned: 1954 Farmall Cub
2013 NH Workmaster 40 - Circle of Safety: Y
- Location: Chewelah, WA
Re: Farmall Cub Being Lockednlubed
I haven’t found a zerk on my farm the LockNLube couldn’t reach. It’s about the same size as my old grease gun tip. I can grease universals with it no problem.
WaMoo - Dairy Farmer and U.S. Coast Guard (Retired)
Chewelah, WA
"I had rather be on my farm than be emperor of the world."
~George Washington
Chewelah, WA
"I had rather be on my farm than be emperor of the world."
~George Washington
-
- Team Cub
- Posts: 17310
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Farmall Cub Being Lockednlubed
I have a couple fittings where even the standard coupler can't be used. I have one of the 90 degree couplers that slides on from the side of the fitting. I finally screwed a Zerk into the 90 degree coupler so I could just stick it on the end of my gun when I need it. It would probably be easier to use with a LockNLube.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Farmall Cub Being Lockednlubed
Locknlube that’s the tip on the hose or the complete system with the grease gun too?
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 5+ Years
- Posts: 2018
- Joined: Tue May 16, 2017 9:25 am
- Zip Code: 63628
- Tractors Owned: '40 H
'44 B
'47 Cub
'49 C
54A Blade
42 Woods Mower
Henderson Loader
Cultivators
No. 8 Little Genius 2-12 Plow
IH Running Gear - Circle of Safety: Y
- Location: Bonne Terre, Mo
Re: Farmall Cub Being Lockednlubed
WaMoo wrote:I haven’t found a zerk on my farm the LockNLube couldn’t reach. It’s about the same size as my old grease gun tip. I can grease universals with it no problem.
I was thinking of just not only the Cub tractors, but I also have a commercial zero turn, a lawn tractor, and some other things that have grease fittings on them. Some are not in very good accessible locations. To be honest, I haven't looked to see if the locknlube coupling can be speedily and easy to remove and change out in those situations.
-
- Team Cub
- Posts: 17310
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Farmall Cub Being Lockednlubed
The lever on the side of the LockNLube could get in the way when you have to reach deep into a hole to reach a grease fitting. The Farmall H clutch might be an example. The Cub tie rods shown in the video are so easy to reach that any coupling will work.
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: Farmall Cub Being Lockednlubed
They make an XL version with a longer reach.
https://locknlube.com/collections/locknlube-grease-coupler/products/locknlube-grease-coupler-xl
I agree it's kinda neat to see it being demonstrated on a Cub.
https://locknlube.com/collections/locknlube-grease-coupler/products/locknlube-grease-coupler-xl
I agree it's kinda neat to see it being demonstrated on a Cub.
Just the tip.BigBill wrote:Locknlube that’s the tip on the hose or the complete system with the grease gun too?
Who is online
Users browsing this forum: Taterbug and 5 guests