This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Pto stays in gaged
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 4
- Joined: Wed May 17, 2023 8:29 am
- Zip Code: 15736
Pto stays in gaged
Since I have gotten my 154 I have noticed that after I get done mowing the pto stays in gaged after I disengage it. I really can't see myself spending $500. on a new one from hamiltonbobs, it's just out of the cards. Any other ideas on how I can fix this issue?
Sirlandslide88
-
- 5+ Years
- Posts: 115
- Joined: Mon Jan 25, 2016 1:14 pm
- Zip Code: 00000
Re: Pto stays in gaged
This tells a bit about what I did to convert to electric PTO. Has been working for a few years now. You only have PTO to drive a belt after converting.
viewtopic.php?f=31&t=92418&p=796061&hilit=Toro+walk+behind#p796061
viewtopic.php?f=31&t=92418&p=796061&hilit=Toro+walk+behind#p796061
-
- Team Cub Mentor
- Posts: 20389
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Pto stays in gaged
PTO uses a cam to engage and release the clutch. You need to remove the sheet metal to get to the PTO clutch and see what is going on.
Guessing, inexpensive fix. - - That's not counting the man hours.
Guessing, inexpensive fix. - - That's not counting the man hours.
I have an excuse. CRS.
-
- Posts: 4
- Joined: Wed May 17, 2023 8:29 am
- Zip Code: 15736
Re: Pto stays in gaged
The tin is removed, after I'm done mowing I noticed that the pto clutch is very hot and smoking. Clutch needs adjusted or rebuilt? Also their is a grease fitting on the shaft, is that for the bearing or clutch?
Sirlandslide88
-
- Team Cub Mentor
- Posts: 20389
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Pto stays in gaged
Clutch is not greased. PTO assembly, 4 bearings including two on the cam clutch. I didn't remember any of the bearings having grease zerks.
Checked the parts books. No zerks shown. Sealed bearings.
Hot and smoking, guessing one or two bad bearings. You will need to disassemble the PTO to find out.
Checked the parts books. No zerks shown. Sealed bearings.
Hot and smoking, guessing one or two bad bearings. You will need to disassemble the PTO to find out.
I have an excuse. CRS.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests