This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub planter help
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Posts: 7
- Joined: Sun Jul 10, 2022 9:55 am
- Zip Code: 63436
Cub planter help
I picked up this planter at an auction this weekend and believe it has a POAX hopper on it. I can't find many options for seed plates and from what I've read so far most people recommend a richmond or combination hopper for more access to seed plates. I was wondering if I could just replace it with a richmond or combination hopper, or if any other pieces would need to be swaped out to make the switch. It looks like it should work just not sure if the hopper drive gear would work for either. Any pictures would be a great help as I'm pretty new to cubs and I've never seen a planter in person before this one.
-
- 10+ Years
- Posts: 5236
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Cub planter help
poax is pretty limited for seed plates, combo or richmond offer much more and modern plastic plates fit also, you would need a different drive unit also to change hoppers, they are different for both
-
- 5+ Years
- Posts: 408
- Joined: Sun Jul 08, 2018 9:02 pm
- Zip Code: 27606
- Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic - Circle of Safety: Y
Re: Cub planter help
Tst pretty well summed it up. If you want to use your cub to plant a garden abandon the poax hopper and base and find a combination or richmond hopper and base. I use a combination hopper and it does a great job planting many varieties of seed. Plates are readily available and can be had for just a few dollars. Plates can be easily modified to handle different seed spacing so all you need to do is swap plates and not the planter drive gearing. This makes it very simple to plant a few rows of this and a few rows of that in very short order
-
- 501 Club
- Posts: 1120
- Joined: Sun Nov 10, 2019 5:14 pm
- Zip Code: 29848
- Tractors Owned: Yanmar YM2000
Yanmar YM186 (non running)
1952 Farmall Cub - Circle of Safety: Y
- Location: Greenwood County SC
Re: Cub planter help
Are we calling the combination planter the IH dual hopper planter with the corn and pea side? If so where are you finding a ready supply of plates. I see that many are made but I am not running across very many?
-
- 5+ Years
- Posts: 408
- Joined: Sun Jul 08, 2018 9:02 pm
- Zip Code: 27606
- Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic - Circle of Safety: Y
Re: Cub planter help
I can’t speak for tst but the dual sided hopper is not the one I was referring to. The combination hopper I use uses he same plates as the richmond hopper which can be iron or plastic plates. The plastic plates are the same ones that more modern IH planters used. They are readily available used on eBay for 5-10 dollars or less. Most are corn plates but they will also plant peas and beans and with a little j b weld or bondo and a dremel tool or round file can be modified to plant most any seed
-
- 10+ Years
- Posts: 3429
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Cub planter help
Clemsonfor wrote:Are we calling the combination planter the IH dual hopper planter with the corn and pea side? If so where are you finding a ready supply of plates. I see that many are made but I am not running across very many?
No. The double sided hopper is the duplex hopper. Good planter, but plates are hard to find. Check out the manuals here on the forum and you’ll find more info than you want to know. Lol
Thomas
-
- 10+ Years
- Posts: 5236
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Cub planter help
the hopper for corn and peas is called a duplex hopper
-
- Posts: 7
- Joined: Sun Jul 10, 2022 9:55 am
- Zip Code: 63436
Re: Cub planter help
Okay I've found a combination hopper and bottom for sale. By the drive unit do you mean the first picture of the piece that bolts to the tractor? Meaning I need a whole new setup?
-
- 5+ Years
- Posts: 408
- Joined: Sun Jul 08, 2018 9:02 pm
- Zip Code: 27606
- Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic - Circle of Safety: Y
Re: Cub planter help
The bracket that bolts to the tractor is universal to all the hoppers but each style hopper has a base specific to that particular hopper. If you look closely at the parts in your first picture it is actually two parts bolted together. The part with the ears that the hopper actually mounts on will have to be replaced.
-
- 5+ Years
- Posts: 408
- Joined: Sun Jul 08, 2018 9:02 pm
- Zip Code: 27606
- Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic - Circle of Safety: Y
Re: Cub planter help
Now you hat you have two posts on the forum you can access the available manuals which will give you parts diagrams of all the different planter hoppers, bases and any other planter specific parts IH offered for the cub
-
- Posts: 7
- Joined: Sun Jul 10, 2022 9:55 am
- Zip Code: 63436
Re: Cub planter help
The manuals will be a huge help going forward. I couldn't find the drive unit for sale online, but I called burch store tractors and they had one in stock. Thanks for all the help!
-
- 501 Club
- Posts: 1120
- Joined: Sun Nov 10, 2019 5:14 pm
- Zip Code: 29848
- Tractors Owned: Yanmar YM2000
Yanmar YM186 (non running)
1952 Farmall Cub - Circle of Safety: Y
- Location: Greenwood County SC
Re: Cub planter help
tmays wrote:Clemsonfor wrote:Are we calling the combination planter the IH dual hopper planter with the corn and pea side? If so where are you finding a ready supply of plates. I see that many are made but I am not running across very many?
No. The double sided hopper is the duplex hopper. Good planter, but plates are hard to find. Check out the manuals here on the forum and you’ll find more info than you want to know. Lol
Yep I have the manual from here, seen the part numbers for all the plates , that's how I know there was a huge selection, but have only seen various corn plates and pea plates.
-
- 5+ Years
- Posts: 408
- Joined: Sun Jul 08, 2018 9:02 pm
- Zip Code: 27606
- Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic - Circle of Safety: Y
Re: Cub planter help
For anyone using a combination or richmond hopper the plastic corn plates are readily available and cheap on eBay. The openings can be filled with j b weld or bondo and new openings of the proper size for your seeds can easily be made with a dremel tool. It’s also easy to adjust your seed spacing by the number of holes you cut in the plate. That is easier to me than changing sprockets and then recalibrating my fertilizer hopper. I also learned to keep an eye out for sunflower plates and the associated filler rings. These thinner plates work great for squash, cucumbers and melons. Another trick I learned is to use the thin metallic duct tape to temporarily close holes on a plate to get the spacing I need with a plate I don’t want to permantly modify. Many people say a cub mounted planter doesn’t plant nearly as accurate as a rear mounted planter due to the long seed tube but it plants plenty accurate for me on my several acre garden
-
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Re: Cub planter help
The company that makes the plastic planter plates is ⬇️
https://lincolnagproducts.com
The plates are also know as lustran plates.
Here is a link to their pdf of all the plates they make and the sizes and cell count!
https://lincolnagproducts.com/wp-content/uploads/2022/02/Lincoln_Ag_Products_2022_Info_Packet_Rev-1.pdf
I printed out the list for myself!
https://lincolnagproducts.com
The plates are also know as lustran plates.
Here is a link to their pdf of all the plates they make and the sizes and cell count!
https://lincolnagproducts.com/wp-content/uploads/2022/02/Lincoln_Ag_Products_2022_Info_Packet_Rev-1.pdf
I printed out the list for myself!
1968 Cub Fast-Hitch
-
- 5+ Years
- Posts: 408
- Joined: Sun Jul 08, 2018 9:02 pm
- Zip Code: 27606
- Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic - Circle of Safety: Y
Re: Cub planter help
Lincoln ag has all the plate sizes listed and is a great reference tool if you are buying used plates. They also have some good cross references for plates to use for different vegetables. I sure couldn’t bring myself to buy plates from them at 45 dollars each though
-
- Similar Topics
- Replies
- Views
- Last post
-
- 11
- 380
-
by Clemsonfor
Wed Jul 07, 2021 8:10 pm
-
- 4
- 133
-
by tmays
Sun Apr 09, 2023 6:55 am
-
- 31
- 876
-
by Magnum
Sun Jan 08, 2023 9:55 pm
-
- 16
- 754
-
by baldwindiesel
Thu Apr 14, 2022 7:47 pm
-
- 5
- 290
-
by BSR
Fri Oct 08, 2021 1:28 pm
Who is online
Users browsing this forum: EIREfarmer and 2 guests