This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Leather touch control boot wire PLEASE HELP
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 244
- Joined: Fri Nov 24, 2017 7:40 pm
- Zip Code: 19954
Leather touch control boot wire PLEASE HELP
Can someone please tell me how to twist the wire that holds the leather boot on the touch control Evertime i go to twist the wire the boot and wire fall off. ive been 5 hours and no results. Worst part of this whole restoration Thanks Billy
-
- 10+ Years
- Posts: 6166
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Leather touch control boot wire PLEASE HELP
Hi,
You didn't say if you are working on the piston boot, or the Control Valve boot, or if it had 1 or both boots on it before.
There should be metal cast in the block that sticks out some for the blocks that used a boot and wire to hold it on. It goes around the bore in the block.
IH changed in the later years of Cubs, and didn't use a boot for the piston anymore, those blocks have very little metal sticking out, there's no way to put a boot or wire on them, I think.
I don't know which you have. If this is a 1957 Cub, it probably has the metal sticking out, it is about 1/4", and has a groove for the wire.
Someone could have put on a newer Touch Control.
Pics of yours would be helpful.
Below is a pic from TM Tractor, showing the piston boot and wire.
You didn't say if you are working on the piston boot, or the Control Valve boot, or if it had 1 or both boots on it before.
There should be metal cast in the block that sticks out some for the blocks that used a boot and wire to hold it on. It goes around the bore in the block.
IH changed in the later years of Cubs, and didn't use a boot for the piston anymore, those blocks have very little metal sticking out, there's no way to put a boot or wire on them, I think.
I don't know which you have. If this is a 1957 Cub, it probably has the metal sticking out, it is about 1/4", and has a groove for the wire.
Someone could have put on a newer Touch Control.
Pics of yours would be helpful.
Below is a pic from TM Tractor, showing the piston boot and wire.
-
- 5+ Years
- Posts: 244
- Joined: Fri Nov 24, 2017 7:40 pm
- Zip Code: 19954
Re: Leather touch control boot wire PLEASE HELP
It is the boot that you have pictured there and it does have a rim stuck out about a quarter inch but for some reason when I slide the boot on and try to put my wire around it pops off I guess I'm just not coordinated
-
- 10+ Years
- Posts: 5228
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Leather touch control boot wire PLEASE HELP
if you have the later style it uses a rubber boot, not leather
-
- 5+ Years
- Posts: 244
- Joined: Fri Nov 24, 2017 7:40 pm
- Zip Code: 19954
Re: Leather touch control boot wire PLEASE HELP
Which rubber boot would be correct . It is a 1957
-
- 5+ Years
- Posts: 244
- Joined: Fri Nov 24, 2017 7:40 pm
- Zip Code: 19954
Re: Leather touch control boot wire PLEASE HELP
Which boots for my touch control would be correct for my 1957. I want to order but im afraid i will order wrong boots.
-
- Team Cub
- Posts: 17291
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Leather touch control boot wire PLEASE HELP
Command52 wrote:Which boots for my touch control would be correct for my 1957. I want to order but im afraid i will order wrong boots.
Read this thread:
viewtopic.php?f=1&t=109227
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4
- 269
-
by Bill V in Md
Thu Feb 10, 2022 9:55 pm
-
-
Should this be used with touch control Attachment(s)
by cowridermi » Sun May 14, 2023 2:41 pm » in Farmall Cub - 2
- 235
-
by radioguy41
Sun May 14, 2023 5:07 pm
-
-
- 5
- 1090
-
by Glen
Thu Dec 28, 2023 6:35 pm
-
-
Rebuilding Touch Control '55 Cub Attachment(s)
by 4thGen » Sun Oct 31, 2021 1:20 pm » in Farmall Cub - 10
- 422
-
by 4thGen
Thu Nov 04, 2021 2:53 pm
-
-
- 6
- 366
-
by tinnerjohn
Wed Oct 06, 2021 11:43 am
Who is online
Users browsing this forum: Shorteeb21 and 6 guests