Must-Have Tools - A Beginner’s Guide

Tools and Reviews to help your fellow Cubber's.
Forum rules
Unwarranted FLAME reviews will be deleted without notice. Members are encouraged to exhaust all arbitration efforts with the companies before posting negative reviews here.

FarmallCub.Com and the moderators are not responsible for member reviews of businesses and attractions.

Send issues regarding reviews to Cub@farmallcub.com.
coreystone11
Posts: 2
Joined: Fri Oct 22, 2021 12:08 am
Zip Code: 78113

Must-Have Tools - A Beginner’s Guide

Postby coreystone11 » Fri Oct 22, 2021 12:23 am

Hey guys,

I’m about to start my first restoration of a Model BN that’s been kept and passed down, but has never served for more than a yard ornament. That said, I wanted to ask and see what tools, especially those that are not ordinary/common. No need to list general hand tools, however, I certainly wouldn’t say no to any size-specific references/lists if so inclined to share. I plan to compile whatever you guys end up sharing and creating a reference guide or cheat sheet if you will that will be posted here. I’ll take it as far as able based on info received. I appreciate any and all time/effort spent by anyone sharing. I’m personally interested in model b obviously but to show appreciation, I’ll happily tabulate and create lists specific to other models and/or groups of models.

Cheers!

Corey

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 19339
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Must-Have Tools - A Beginner’s Guide

Postby Eugene » Fri Oct 22, 2021 4:10 pm

The tractor was designed for the farmer to work on with common hand tools.

For more extensive work; impact wrench and sockets, 1/2" & 3/8" socket set.

Suggest not purchasing any tools until you discover that you need them. You will need some expensive to very expensive tools if you work on the engine's internals.

Edit: Purchase quality tools.
I have an excuse. CRS.

User avatar
Lt.Mike
10+ Years
10+ Years
Posts: 2400
Joined: Sun Feb 17, 2008 2:38 am
Zip Code: 07727
Tractors Owned: 1 -'58 International Cub Lo-Boy
2 - '46 International A's
2 - '52 Farmall Cubs
1 - '53 Farmall Super A
1 - ‘41 Ford 9N with a ‘49 8N Engine
1 - ‘48 (5641) Allis Chalmers G
Location: Farmingdale NJ

Re: Must-Have Tools - A Beginner’s Guide

Postby Lt.Mike » Fri Oct 22, 2021 7:54 pm

Eugene wrote:For more extensive work; impact wrench and sockets, 1/2" & 3/8" socket set.
Edit: Purchase quality tools.

If you buy a socket set particularly if it’s half in drive, buy the black impact sockets as they are stronger. I’ve broken many a chromed socket but never a black impact socket. Also Harbor Freight sells them cheap and they hold up just fine.
Grab a long breaker bar too that will help with wheel studs.
Quote by Gary Pickeral I like
"If it can cast a shadow, it can be restored"

User avatar
Dale Finch
10+ Years
10+ Years
Posts: 5636
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '51 Cub "Bernie" with Fast Hitch
'55 Cub "Bruno" with Woods 59 mower
'55 Cub "Bertha" with Woods 42 mower
'55 Cub "Ben" with Woods 42 mower
'56 Cub "Boris" with Mott Flail mower
Circle of Safety: Y
Location: NC, Chapel Hill

Re: Must-Have Tools - A Beginner’s Guide

Postby Dale Finch » Sat Oct 23, 2021 8:34 am

I recommend that your sockets are 6-point sockets {rather than/or in addition to, 12-point)...fewer rounded of corners.

Something that has made my life easier are square pipe plug sockets, similar to these:

https://www.amazon.com/s?k=pipe+plug+socket+set&adgrpid=59875238761&gclid=CjwKCAjw5c6LBhBdEiwAP9ejG28Zq7sQyvjpx4FFAfXDzma9w9AR9l2_63ORCw-sq34IDZf7BRneOxoC3ksQAvD_BwE&hvadid=274776355823&hvdev=m&hvlocphy=9009671&hvnetw=g&hvqmt=e&hvrand=13998654407382050444&hvtargid=kwd-296300241809&hydadcr=20350_9348762&tag=hydsma-20&ref=pd_sl_31onu03t19_e

They are good for the radiator drain plug, transmission "full level" plug, touch control drain plug, and steering housing plugs.

Some other tools I have found invaluable are engine hoist, rolling jackstand (search the forum...many ideas), compression tester.

Good luck! :D
Dale Finch
Image
Circle of Safety

User avatar
ricky racer
10+ Years
10+ Years
Posts: 5391
Joined: Wed Sep 12, 2007 8:40 pm
Zip Code: 49120
Circle of Safety: Y
Location: Niles / Buchanan, Michigan

Re: Must-Have Tools - A Beginner’s Guide

Postby ricky racer » Sat Oct 23, 2021 8:35 am

Eugene wrote:You will need some expensive to very expensive tools if you work on the engine's internals.


I'm not quite sure I agree with you on this Eugene. The only expensive tools I can think of are micrometers but you can probably get by with a decent set of 6" dial calipers and a cheap set of snap gauges for checking bores. Those will let you see if bores need re-bored or if bearing journals need ground.

Now if you're talking about cutting new valve seats or grinding valves then yes, I'd agree with you but most folks will have a machine shop do that work for them.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub

SamsFarm
501 Club
501 Club
Posts: 922
Joined: Wed Jan 20, 2021 8:21 pm
Zip Code: 44410
Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
Fast Hitch CS Bell 60 Grain Mill
Home Made Fast Hitch Potato Plow
54A Blade

Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)

Misc Belly Mowers

Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower

Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill
Location: Ne Ohio

Re: Must-Have Tools - A Beginner’s Guide

Postby SamsFarm » Sun Oct 24, 2021 7:44 am

If your young or want to pass on a legacy, buy high quality USA made tools.

If your old, and dont care, not going to do much with the tools beyond this one time, buy whatever and a few extra boxes of bandaids. Keep in mind that resale value of harbor freight type tools is very low!

If your in the "not going to do much becides this tractor category" then skip the power tools too!

'
ricky racer wrote:you can probably get by with a decent set of 6" dial calipers


I disagree with using dial (or digital) calipers for engine work.

Some people can squeeze too hard, some not hard enough, some will have the jaws cocked to whatever they are measuring.
1968 Cub fast hitch

Mht
Cub Star!!
Cub Star!!
Posts: 296
Joined: Sun Jul 08, 2018 9:02 pm
Zip Code: 27606
Tractors Owned: 1949 farmall cub(building from parts) 1950 farmall cub
1971 David Brown 880 selectamatic
Circle of Safety: Y

Re: Must-Have Tools - A Beginner’s Guide

Postby Mht » Fri Oct 29, 2021 6:24 pm

I wouldn’t work on old stuff without my right angle die grinder and surface conditioning discs. Mine is a harbor freight 15 dollar version with their brand roll lock discs and it’s been a workhorse for years with very little care and no issues what so ever. My oxy acetylene torch is another must have for me. I almost never break a bolt off after heating them first. If you are just starting out buying hand tools the Best Buy out there is quality name brand tools from yard sales and flea markets. It might take a while to assemble a large collection but you don’t need a large collection to work in old tractors.

Jim Naden
Posts: 2
Joined: Mon Nov 15, 2021 5:25 pm
Zip Code: 46031

Re: Must-Have Tools - A Beginner’s Guide

Postby Jim Naden » Mon Nov 15, 2021 5:39 pm

One item not mentioned is a quality respirator with changeable filters. Older tractors can have asbestos in the gaskets and you don't want to be breathing that stuff, especially if you are fond of using 3M (style) cookies to prepare the gasket surface.


  • Similar Topics
    Replies
    Views
    Last post

Return to “Tool Talk and Reviews”

Who is online

Users browsing this forum: No registered users and 1 guest