3260 mower

[john2189]

Is there a manual for the 3260 mower in the pdf section? I only see the 3160a

[Eugene]

What information do you need?

In the mower section is a manual showing how to mount the 3260.

I haven't purchased any parts for my 3260 in some time. I would look up the needed part number, then order/obtain the part from the IH dealership or the CaseIH/New Holland dealership.

[john2189]

What information do you need?

In the mower section is a manual showing how to mount the 3260.

I haven't purchased any parts for my 3260 in some time. I would look up the needed part number, then order/obtain the part from the IH dealership or the CaseIH/New Holland dealership.

This is what is in the pdf manuals and it is not the 3260.

[john2189]

What information do you need?

In the mower section is a manual showing how to mount the 3260.

I haven't purchased any parts for my 3260 in some time. I would look up the needed part number, then order/obtain the part from the IH dealership or the CaseIH/New Holland dealership.

The front is way higher than the rear. I don’t see any way to adjust it

[Eugene]

I had trouble setting up the 3260 mower on my 154 until I found the picture - -

Left above, quick links, 154, mowers. Third page down.

Rear of the deck is some pin holes you use to adjust the front to back pitch.

If that doesn't do it, see if you can move the link attached to the rock shaft forward to lengthen the stroke.

Still thinking. There are adjustment holes where the mower mounts to the tractor's finals. I'm using top holes.

[john2189]

Thanks Eugene, I found it. My TC131 book is rev 16 and it doesn’t have that mower in it. I will compare pics and see what is wrong.