154 mower

[john2189]

My 3260 deck is rusted very badly and the mounting arm is badly bent. Is there a more modern deck that would fit?

[Eugene]

There are a number of mowers that can be attached to a numbered Cub. The difference is the hardware to mount the deck to the tractor.

I have a 3260 deck mounted on my 154. Over the years I have patched the holes, straightened dents, purchased new blades and one spindle.

My suggestion is to make the repairs, much cheaper than purchasing another mower deck.
Edit for spelling.

[john2189]

Ok thanks. The middle blade seems to not cut like the two outside blades. I did sharpen them, it helped a little.

[SONNY]

Are the spindles tight?--no loose bearings? If the shell is that bad,---it may be warped.
I have some decks here, Danco and Woods that are decent decks. I don't use them anymore,---I moved up to a sunstar 60" 20 hp model.
If anybody wants these decks they can have them.

[john2189]

Are the spindles tight?--no loose bearings? If the shell is that bad,---it may be warped.
I have some decks here, Danco and Woods that are decent decks. I don't use them anymore,---I moved up to a sunstar 60" 20 hp model.
If anybody wants these decks they can have them.

Yes spindles are tight. If you were closer, I’d take you up on the woods. I have a 20 horse sunstar too. 60” deck.

John