This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

1A tiller right hand drive

IHC Cub Cadet Forum -- Questions and answers to all of your Cadet related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Smokeycub
10+ Years
10+ Years
Posts: 1051
Joined: Tue Apr 26, 2011 10:47 am
Zip Code: 44266
Tractors Owned: 48 F Cub #11678
65 Cub Cadet 104
70 450C JD loader
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C
Circle of Safety: Y
Location: Ravenna, Ohio

1A tiller right hand drive

Postby Smokeycub » Mon Jan 04, 2021 1:50 pm

Hi fellas, It's been a while since I've posted. Has anyone experienced a bevel gear moving out of alignment inside of the RH gear box for a 1A tiller? I'm not certain how it moved but it wasn't real snug on the shaft so I tried to stake in place but it moved again. What's strange is it was working great and I finished tilling, but when I took the tiller off the tractor I noticed the gears were no longer engaged. I looking for ideas on how to repair it. Thanks in advance - Ray :coffee:
Ray
Smokeycub
Attachments - 193 plow - 144 cultivator - 22 mower - 28A disc harrow - 54 leveling blade - Woods 59C2 - drag harrows - Mott D9 flail - flat belt pulley
Image
The squeaky wheel may get the grease but it's usually the first to be replaced!
Top
BigBill
10+ Years
10+ Years
Posts: 7388
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: 1A tiller right hand drive

Postby BigBill » Mon Jan 04, 2021 7:36 pm

If the gears aren’t engaged something moved. Did the shaft walk out?

https://www.partstree.com/models/tiller ... degrees-3/

Here’s the 1a but no exploded view of the 90 degree box.
https://www.partstree.com/models/tiller ... ttachment/
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Top
Smokeycub
10+ Years
10+ Years
Posts: 1051
Joined: Tue Apr 26, 2011 10:47 am
Zip Code: 44266
Tractors Owned: 48 F Cub #11678
65 Cub Cadet 104
70 450C JD loader
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C
Circle of Safety: Y
Location: Ravenna, Ohio

Re: 1A tiller right hand drive

Postby Smokeycub » Fri Jan 15, 2021 1:56 pm

Hi Bill, Thanks for responding. The shafts seem to be intact but the one bevel gear is moving out of position, I believe it's supposed to be a press fit. I that's the case I'll have to machine a new shaft for it.
Ray
Smokeycub
Attachments - 193 plow - 144 cultivator - 22 mower - 28A disc harrow - 54 leveling blade - Woods 59C2 - drag harrows - Mott D9 flail - flat belt pulley
Image
The squeaky wheel may get the grease but it's usually the first to be replaced!
Top
SamsFarm
501 Club
501 Club
Posts: 1853
Joined: Wed Jan 20, 2021 8:21 pm
Zip Code: 44410
Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade

Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)

Misc Belly Mowers

Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower

Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill
Location: Ne Ohio

Re: 1A tiller right hand drive

Postby SamsFarm » Wed Mar 17, 2021 4:59 pm

Is there a snap-ring groove on your shaft?
Top

Return to “Cub Cadet”

Who is online

Users browsing this forum: No registered users and 0 guests