F-20 teardown finally

Farmall F-xx Series Tractors, 1931-1939
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Slim140
501 Club
501 Club
Posts: 4695
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 00000
Tractors Owned: .
1970 International 140
1972 International 140
1949 John Deere A
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y

Re: F-20 teardown finally

Postby Slim140 » Mon Jul 12, 2021 6:15 am

mcwinter wrote:During attempts to remove head studs, two snapped off about even with the block surface. Some of them did come out, but I left the rest. I have drilled out the broken studs (one more centered than the other) but neither would loosen up with an easy out.

The well centered hole I have drilled out to 3/8" almost to the edge of the block threads. I have tried to get a tap started, but not enough threads available yet to get it going.

Any suggestions for how to remove the remaining stud material? Drill out more to enable the 1/2"-13 tap to work? Drill out the holes enough to use some sort of thread insert?

Thanks

IMG_2240 (2).jpg
IMG_2241 (2).jpg
IMG_2242 (2).jpg
IMG_2243 (2).jpg

Heat, lots of heat with the easy out.
Every home is a school, what are you teaching?

Circle of Safety


Return to “Farmall F-xx Series”

Who is online

Users browsing this forum: No registered users and 1 guest