Oil seal behind brake drum part# NAPA

[oldfarmkid]

Was unable to find a part number on line for the oil seal behind the brake drum for my 1940 - H. Part # 23184 is for NAPA, SKF is the brand name.

[Slim140]

What exactly are you looking for? If you search NAPA for the number you provided it shows the seal for $20.99 https://www.napaonline.com/en/p/NOS23184

[Stanton]

Looks like Shane has you fixed up. You have 3 NAPA auto parts stores in your zip code.

[John *.?-!.* cub owner]

The new seal will be a lot different than the old one. The original is actually 2 slightly smaller OD seals inside a shell that makes them into a single unit. Getting all of that out is a lot of fun. A small dent puller for the 2 seals followed by a rocking horse seal puller worked for me. In place of the dent puller, sheet metal screws and a small wrecking bar can be used. Sorry for the picture, but that is the smallest one I could find.

[oldfarmkid]

I must have written my reply wrong. While searching forums ,folks would say they bought the seals at NAPA but no one provided a part number. I was simply providing the proper part number after I found it at my local NAPA. And yes the old one was a bear to pull to begin with. Rotated one of the puller legs I used to pull the drum. Then I could us it as a claw, and the second seal was out in five min.

[Slim140]

That makes sense now, thanks for clarifying.

[Stanton]

Yes, that makes a difference. Thanks for clearing that up.