I have a new to me 77 IH574 diesel with an international 1850 loader. I had a leak in one of the rear remote lines so I replaced it. Topped off fluid and let it run to prime. The new line does not get any fluid. The bucket goes up and tilts down and that’s it. I can not lower the bucket. I’ve let it run and run to get any air out but to no avail.
Power steering and 3pt work as they should. No leaks seen
Any ideas? Very new to hydraulics like this I have Farmalls with the touch control but no remotes.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
574 hydraulics
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
cdd
- 5+ Years
- Posts: 74
- Joined: Tue Apr 02, 2019 2:27 pm
- Zip Code: 00000
- Tractors Owned: 51 Cub with cub 22 sickle bar mower
55 Cub with woods 42 mower
51 Super A with L306 mower
52 Super A with 22 mower
53 Super C
53 Super A with L59 woods mower
66 140 with L306 mower
61 140 with fast hitch
74 International 574 with international 1850 loader
No. 7 Sickle mower x2
McCormick 100 spreader
72 International Harvester 1210 dually w/flatbed
65 Ford F600 flatbed
574 hydraulics
Crops are green, tractors are RED! 
-
SamsFarm
- 501 Club
- Posts: 1853
- Joined: Wed Jan 20, 2021 8:21 pm
- Zip Code: 44410
- Tractors Owned: 1968 Cub Fast Hitch
LF-1 Platform Carrier
144 Cultivators
L-F194 Plow(s)
F38 Disk
L-F3 Spring Tooth Harrow
CS Bell No. 60 Grain Mill on a unmodified Fast Hitch Disk hitch prong
Home Made Fast Hitch Potato Plow
54A Blade
Couple 1948 Cubs
172 Runner Planter
53 Fertilizer
Cub-3 Field Cultivator
Cub-189 Two Way Plow
Cub-22 Sickle Bar Mower
Mechanical Transplanter with side mount barrel (needs a fast hitch adapter) :)
Misc Belly Mowers
Wish List
International 100 Fast Hitch Blade
Mott Fast Hitch Flail Mower
Wish Wish Wish List
Fast Hitch Rotary Hoe
4E hammer mill - Location: Ne Ohio
Re: 574 hydraulics
cdd wrote:I have a new to me 77 IH574 diesel with an international 1850 loader. I had a leak in one of the rear remote lines so I replaced it. Topped off fluid and let it run to prime. The new line does not get any fluid. The bucket goes up and tilts down and that’s it. I can not lower the bucket. I’ve let it run and run to get any air out but to no avail.
Power steering and 3pt work as they should. No leaks seen
Any ideas? Very new to hydraulics like this I have Farmalls with the touch control but no remotes.
Is your rear remote line hooked to your loader?
I cant see how it is hooked up, so it is real hard for anyone to make a guess!
1968 Cub Fast-Hitch
Return to “Farmall / IH / CASE”
Who is online
Users browsing this forum: No registered users and 1 guest
