This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Farmall 100 finals
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
ShawnAgne
- 5+ Years
- Posts: 846
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Farmall 100 finals
Doing a restore on my 100, have a very experienced guy doing the sandblasting and taped everything up and he's confident nothing is in, but we're still going to flush it all. Since they'll be removed is there anything I should go ahead and replace on it since I'll have them off? There was an oil leak coming from somewhere but tractor was so dirty when I got it was hard to tell where.
Shawn Agne
-
Gary Dotson
- Team Cub Mentor
- Posts: 5651
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Farmall 100 finals
I think you need to clean it up, run it a while and repair any leaks or other problems before you consider any kind of paint prep. You’ll thank yourself later.
-
ShawnAgne
- 5+ Years
- Posts: 846
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Re: Farmall 100 finals
Hi Gary,
Thanks for the reply. I have ran and mowed with it since I got it back in July I sprayed it off but still just a lot of gunk on it. As I said in the OP I already had started the restore, have it blasted and it has been painted, just going through and rinsing areas out to make sure everything is good. Talked with the gentleman at Burch's and just going to replace the oil seals in the finals and the breaks.
Thanks for the reply. I have ran and mowed with it since I got it back in July I sprayed it off but still just a lot of gunk on it. As I said in the OP I already had started the restore, have it blasted and it has been painted, just going through and rinsing areas out to make sure everything is good. Talked with the gentleman at Burch's and just going to replace the oil seals in the finals and the breaks.
Shawn Agne
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 1 guest
