![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
![Wink :wink:](./images/smilies/icon_wink.gif)
![Shocked :shock:](./images/smilies/icon_eek.gif)
![Big Smile :big smile:](./images/smilies/10900.gif)
Such is the problem with the Guide Lens for the Tear Drop Lights. They are expensive to replace with repros, and almost impossible to find as originals
![Shocked :shock:](./images/smilies/icon_eek.gif)
- How To Make A Tear Drop Lens Storage Case
- Save a 50 CD Storage Spindle Tower Case. Make sure you keep the little foam washers and the clear CD blanks.
- Cut off the centre spindle on the band saw or with a Flush Cut Hand Saw
- Take 5 Foam Spacers and place between the base and the first lens.
- Place and additonal 2 Foam Spacers between each lens. I have 3 for storage, but you can fit up to 5 Lenses in one Spindle Tower Case.
- Replace the Spindle Tower Case Cover and put your Lenses safely away in storage.