Anything pertaining to these components will be found here.
1 post • Page 1 of 1
- 10+ Years
- Posts: 2707
- Joined: Wed Oct 12, 2005 8:28 am
- Zip Code: 48463
- Tractors Owned: 1956 FAST HITCH CUB
MODEL 10 CUB TRAILER
2 1950 Demonstrators
- Location: MICHIGAN, OTISVILLE
Here is how:
Step 1: Start with a small soup can (the small one is almost perfect in length and diameter).
Step 2: Open the can and make soup. . Next cut about 1/4" of the bottom of the can off with a cutting tool, (be careful to not cut yourself on the sharp edges).
Step 3: Cut a slit down one side of the can, so that the can will tighten down evenly on the PTO assembly.
Step 4: Place a hose clamp on each end of the can and tighten down starting with the end closest to the tractor.
Warning **** You will want to round over, burnish or fold over and crimp the cut edges so that they do not cut the operator.
Other variations are below:
No slit, one clamp
No slit, closed end, one clamp
- Similar Topics
- Last post
Mon Apr 12, 2021 1:20 pm
Sun Jul 03, 2022 8:52 am
Sun Jul 24, 2022 3:26 pm
by Binky Tremain
Wed Sep 15, 2021 10:05 pm
Wed Nov 30, 2022 12:00 pm
Who is online
Users browsing this forum: No registered users and 0 guests