This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

C-2 mower clutch pins

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
inairam
5+ Years
5+ Years
Posts: 2851
Joined: Wed Jul 08, 2015 10:24 am
Zip Code: 19342
Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide
Circle of Safety: Y
Location: Glen Mills PA

C-2 mower clutch pins

Postby inairam » Fri May 24, 2024 6:14 pm

I had the bolt come off the cap that holds the pulley and clutch on. I found the pulley but lost the bolt, the cap, key, the pins, and the springs in a field. I went out there with a floor magnet sweaper but not joy.

I am not worried about the other items but Messick has one pin and it is $63.60!!! need 4.

Does anyone have a source for the clutch pins? PN 474031R1
When you only have 9 horsepower you need to know the names of all of the ponies!
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11923
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: C-2 mower clutch pins

Postby Bob McCarty » Fri May 24, 2024 6:36 pm

I found some springs at ACE that were very close in size and shape. Could you cut drill rod/ grade 8 bolts to make the pins?
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
tractorpoor
10+ Years
10+ Years
Posts: 71
Joined: Tue Jan 18, 2011 3:51 pm
Zip Code: 27530
Tractors Owned: 26 Cubs (49-79)
Farmall 130
Kabota B7500
NH TC45
Location: NC

Re: C-2 mower clutch pins

Postby tractorpoor » Sat May 25, 2024 5:16 pm

PM sent.
Top
  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 7 guests