This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Back cultivator help
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Star
- Posts: 53
- Joined: Fri May 27, 2022 4:36 pm
- Zip Code: 75119
Back cultivator help
Hey gentlemen I just put the back feet on my cub for the first time and the back feet at way too close to the tire. I couldn't get the cuff in to put a cultivator on like this. They also don't even make it to the center of the tire. Any suggestions?
-
- 5+ Years
- Posts: 106
- Joined: Thu Jun 22, 2017 5:55 pm
- Zip Code: 41094
Re: Back cultivator help
What holes on the final drives are you using, should be using the back holes that the drawbar mounts into. Other wise, you might have incorrect rear frames. Pictures might help.
-
- 10+ Years
- Posts: 3430
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
-
- Cub Star
- Posts: 53
- Joined: Fri May 27, 2022 4:36 pm
- Zip Code: 75119
-
- 10+ Years
- Posts: 6711
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Back cultivator help
I'm certainly no cultivator expert, but I believe you are using the wrong 2 holes for mounting...try the 2 REAR holes, one on top of the other, which would rotate the bracket 90 degrees.
http://www.tmtractor.com/tm-tractor/gim/rear_gang_001.htm
Actually, in comparing your photo and the TM photo, you may just have the two brackets swapped left to right finals...on the wrong sides. It's really hard to see your bracket's orientation well.
http://www.tmtractor.com/tm-tractor/gim/rear_gang_001.htm
Actually, in comparing your photo and the TM photo, you may just have the two brackets swapped left to right finals...on the wrong sides. It's really hard to see your bracket's orientation well.
-
- Team Cub Mentor
- Posts: 17533
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Back cultivator help
Looks to me like you have the bracket on backwards. The clamp bolt end of the bracket goes out, not in. Check out the Cub-144 manual in the PDF Manuals section.
-
- Cub Star
- Posts: 53
- Joined: Fri May 27, 2022 4:36 pm
- Zip Code: 75119
Re: Back cultivator help
Thank y’all!
-
- 10+ Years
- Posts: 69
- Joined: Tue Jan 18, 2011 3:51 pm
- Zip Code: 27530
- Tractors Owned: 26 Cubs (49-79)
Farmall 130
Kabota B7500
NH TC45 - Location: NC
Re: Back cultivator help
Here are a couple pics of my setup. Hopefully it helps.
- Attachments
-
- IMG_2271.jpeg (27.15 KiB) Viewed 133 times
-
- IMG_2272.jpeg (30.28 KiB) Viewed 133 times
-
- 10+ Years
- Posts: 3430
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
-
- Cub Star
- Posts: 53
- Joined: Fri May 27, 2022 4:36 pm
- Zip Code: 75119
Re: Back cultivator help
Thank y’all! Got them all set up now.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 351
-
by SONNY
Mon Dec 06, 2021 5:31 pm
-
- 10
- 560
-
by Clemsonfor
Sat Mar 26, 2022 1:51 pm
-
- 3
- 230
-
by Sdec
Fri Jun 02, 2023 3:05 pm
-
- 4
- 192
-
by Electronrider
Thu Mar 23, 2023 9:32 am
-
- 4
- 355
-
by Rmpelley
Tue May 17, 2022 6:28 am
Who is online
Users browsing this forum: No registered users and 3 guests