I work on a lot of cultivators, mostly because they are rusted together from being left outdoors to rust together and spend time to get all of it freed up and adjustments working, cultivators are a miserable thing as they like to bite you and get wrapped around you like a snake, one part always frozen and is a pain to break free is the yoke that adjusts, so made a quick tool to deal with this, to turn these by hand is about impossible when froze up after not moving for 50 years, much of the time a torch is used to convince them to move , the tool is very simple, just a chunk of flat stock the thickness of the inside diameter of the yoke it self, about 1 ", set the block in the yoke then drill a hole through it for the pin, next I welded an old 1/2 " drive socket to it, now with the pin installed I just spin it free with my impact wrench in a few seconds instead of fighting with it
this may not be for everyone but myself as I do several sets a year it saves a lot of time
Cultivator Tool
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 5083
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
-
- Team Cub
- Posts: 24141
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Cultivator Tool
I copied this into the how to forum.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.


-
- 10+ Years
- Posts: 5083
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Cultivator Tool
hope it makes a few easier for others
-
- Team Cub Mentor
- Posts: 17259
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Cultivator Tool
Would work for Fast Hitch yokes, too.
-
- 5+ Years
- Posts: 12
- Joined: Sun Mar 18, 2018 8:42 am
- Zip Code: 00000
Re: Cultivator Tool
Great idea!!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 15
- 735
-
by Don McCombs
Wed Oct 27, 2021 3:19 pm
-
- 6
- 295
-
by Stanton
Tue Jul 20, 2021 6:20 am
-
- 6
- 468
-
by hotrodcars
Wed Apr 21, 2021 6:54 pm
-
- 5
- 341
-
by SONNY
Mon Dec 06, 2021 5:31 pm
-
- 3
- 205
-
by Sdec
Fri Jun 02, 2023 3:05 pm
Who is online
Users browsing this forum: Gene Rogers, Grant, Jbd and 2 guests