Update on new 1948 cub

[Don McCombs]

Place an ad in The Vine seeking that part.

[Barnyard]

Run the tractor with about an ounce of seafoam per gallon of gas for several hours under load. It will smoke some, but I was able to increase my compression a bit. It worked for me after working with a sickle mower, but your results may vary. Easy way to try before tearing down your engine.

[Rick Spivey]

Anyone know a way to repair a missing drive lug on a magneto

I'm sure I have a few extra of those impulse coupling covers, but you need to use a special puller to get the old one off without risking damage to some of the parts. Send me an address by PM or to spiveyricharda@gmail.com if you'd like a replacement piece.

[1948cubnovice]

Its alive got the new cub running today i9t will only stay running a few minutes at a time i think the carburetor is shot ordering a new tonight hopefully that will take care of the dying and will let it run smoothly

[Don McCombs]

If you are ordering an aftermarket carb from Ebay, let us know. There are several things you need to be aware of before trying to use it.

[1948cubnovice]

If you are ordering an aftermarket carb from Ebay, let us know. There are several things you need to be aware of before trying to use it.

I ordered one of the cheep cards from ebay while working on my first cub and it pored gas . took it apart to do a float adjustment and the float was in peaces ordered another one from amazon it work just fine but i have got two ih carbs i would like to have rebuilt just cant find anyone around here that is willing to do it

[Dale Finch]

If you want to have fun AND get your carbs rebuilt at the same time, consider attending the Barnyard Bash the first week of June.
http://www.barnyardbash.com/
I think you'll enjoy it & learn a lot with all the projects that are worked on!

[Don McCombs]

Recommend you read the attachment...

CHINESE REPRO CARBURETORS FROM EBAY.pdf

(209.2 KiB) Downloaded 241 times

[1948cubnovice]

Just got the new carb from amazon fixed the problem of the cub not running when to move the cub clutch is not releasing any to adjust the clutch thanks for any help y'all can give

[Don McCombs]

Was the hole drilled properly in the carb?

[1948cubnovice]

yes sr cub is running good

[Don McCombs]

Maybe the CCP has their QA/QC issues worked out on this one.

[1948cubnovice]

Maybe the CCP has their QA/QC issues worked out on this one.

Sr the carb I got today is made in America came from Lexington Kentucky

[Bob McCarty]

Sr the carb I got today is made in America came from Lexington Kentucky

I'll play the devil's advocate here. Unless you paid a lot, lot more than $30- 50 for your carb, it likely came from offshore and the seller is from Lexington.

[Don McCombs]

Wow! Could you post a photo of it? Thanks.