Rescue Cub in Brazil

stephanev8brazil · Postby **stephanev8brazil** » Sat Oct 16, 2021 10:19 am

it's amazing, my engine is with good measurements. I was lucky.

stephanev8brazil · Postby **stephanev8brazil** » Sat Oct 16, 2021 11:45 am

Dale Finch wrote:You probably already know, but when reinstalling the engine cover and front crankshaft pulley, the Manual says to install, but NOT tighten the engine cover bolts until the pulley is fully installed. This allows the front seal to center itself on the pulley, preventing leaking.

If the pulley shaft has a deep wear groove where the seal rode, you can install a "wear sleeve" (Speedi Sleeve):

http://www.tmtractor.com/new/en/472fp.htm

Thank you sir

Postby **Jim Becker** » Sat Oct 16, 2021 12:12 pm

stephanev8brazil wrote:
Dale Finch wrote:. . .

Thank you sir

~~sir~~ ma'am

stephanev8brazil · Postby **stephanev8brazil** » Sat Oct 16, 2021 6:15 pm

I got remove the manifold broken bolts

https://www.instagram.com/tv/CVG39d-l-m ... _copy_link

stephanev8brazil · Postby **stephanev8brazil** » Sat Oct 16, 2021 6:53 pm

how am i going to find exact original color of farmall cub in Brazil. Someome has formula of color ?

stephanev8brazil · Postby **stephanev8brazil** » Sat Oct 16, 2021 7:29 pm

Tractor museun in Brazil has a lot of farmalls models . Agromen

https://www.youtube.com/watch?v=S1WMTs6VGAA

https://www.youtube.com/watch?v=-H0m-RSw4JA

Postby **Don McCombs** » Sat Oct 16, 2021 9:48 pm

Here is a paint chart that may be helpful...

Paint Chart (1).xlsx: (14.92 KiB) Downloaded 239 times

Pap · Postby **Pap** » Sat Oct 16, 2021 10:44 pm

Stephane you are doing a great job keep it up. And we really appreciate you letting us see what you are doing to it. Thank You.

Clemsonfor · Postby **Clemsonfor** » Sun Oct 17, 2021 6:58 am

stephanev8brazil wrote:
Dale Finch wrote:You probably already know, but when reinstalling the engine cover and front crankshaft pulley, the Manual says to install, but NOT tighten the engine cover bolts until the pulley is fully installed. This allows the front seal to center itself on the pulley, preventing leaking.

If the pulley shaft has a deep wear groove where the seal rode, you can install a "wear sleeve" (Speedi Sleeve):

http://www.tmtractor.com/new/en/472fp.htm

Thank you sir

Mam

Clemsonfor · Postby **Clemsonfor** » Sun Oct 17, 2021 7:00 am

Jim Becker wrote:
stephanev8brazil wrote:
Dale Finch wrote:. . .

Thank you sir

~~sir~~ ma'am

He clearly missed my earlier post as well :shock:

Pap · Postby **Pap** » Sun Oct 17, 2021 7:13 am

I think he hasn't figured out that Dale is a Female yet.

Maybe it's the English language problem.

Dale Finch · Postby **Dale Finch** » Sun Oct 17, 2021 7:20 am

Hi, Stephanev8Brazil!

The above posts are a reference to ME. The guys are simply letting you know I am a female! I am used to being referred to as Sir, since there are not that many females working on, playing with, and restoring these tractors. No offense taken!
:big smile:

Keep the posts coming, and I hope you don't run into any major problems!

stephanev8brazil · Postby **stephanev8brazil** » Sun Oct 17, 2021 9:51 am

Dale Finch wrote:Hi, Stephanev8Brazil!

The above posts are a reference to ME. The guys are simply letting you know I am a female! I am used to being referred to as Sir, since there are not that many females working on, playing with, and restoring these tractors. No offense taken!

Keep the posts coming, and I hope you don't run into any major problems!

Im Sorry, Really english problem. I have an farmall Cub encyclopedia written by Rachel Gingell. Women are very professional in mechanics . I am studying english to better understand.